Stimmen - 3, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
800-477-2267 ext. 230 support@peripheralelectronics.com ©2009 AAMP of Florida, Inc. Rev. 2-5-09 Inst003 Table of Contents Pages 1. Introduction 2 2. Precautions 2 3. Compatibility Notes 3 4. Dipswitch Settings 3 5. Installation 4 6. iPod Operation 5-6 7. HD Radio Operation (if equipped) 7 8. Selecting AUX Input 7 9. Selecting Factory Satellite 7 (if equipped) 10. Troubleshooting 8 11. Warranty Info 9 Peripheral Electronics®, a division of AAMP of America™ 13160 56th Court Clearwater, Florida 33760 Ph. 800-477-2267 ext. 230 support@peripheralelectronics.com ©2009 AAMP of Florida, Inc. Media Gateway & Optional Add-ons Media Gateway Harness Part #: PGHTY1 Factory Radio Not Included iPod Not Included Media Gateway Part #: PXAMG 3Ft. HD Radio Cable 11Ft. iPod Cable HD RadioTM Tuner (sold separately) Part #: HDRT (Sold with HDRT) Media Gateway Harness Part #: PGHTY1 Factory Radio Not Included iPod Not Included Media Gateway Part #: PXAMG 3Ft. HD Radio Cable 11Ft. iPod Cable HD RadioTM Tuner (sold separately) Part #: HDRT (Sold with HDRT) 1. Introduction Thank you for purchasing the Peripheral Electronics® Media Gateway. The Media Gateway is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your iPod performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the Media Gateway. The Media Gateway allows connectivity for iPod and the HD Radio tuner (HDRTsold separately), enabling full control of these devices from the factory installed radio. It also retains original system features such as satellite radio and rear seat entertainment (if equipped). 2. Precautions UPDATING iPod FIRMWARE For proper operation of the Media Gateway, your iPod must be updated with the most recent version of firmware from Apple. This is done on your computer. To update the software on the iPod go to: Follow the directions on the website to complete the download. There is no charge for this update. PREVENTING DAMAGE TO YOUR VEHICLE OR IPOD. To eliminate the risk of an electrical short, we recommend disconnecting the vehicle’s battery prior to installation. If you do not feel comfortable making these connections, we suggest you seek professional installation. We recommend that the iPod be disconnected from the interface when the vehicle is not in use. PROPER MOUNTING LOCATION Securely install the interface in a location free from; heat, humidity, moving parts, sharp metal edges or direct sunlight. We recommend securing the interface to a suitable location using; double sided tape, VelcroTM or zip-ties. 3. Compatibility Notes This section will inform you of the specific requirements for your factory radio to be compatible with the Media Gateway. These notes will inform you of any issues or circumstances that can affect the compatibility of our product with your radio, audio system, or accessories. Not all Factory radios are compatible with the Media Gateway. The Media Gateway will only work on models equipped with the specifications listed below. Please read and understand these notes before proceeding: Radio Requirements Radios have a button labeled “SAT” or “AM/SAT”. This indicates that the required connection is present on the rear of the head unit and that the radio has the necessary functionality to operate the Media Gateway. Please visit to verify your vehicle’s compatibility. 4. Dipswitch Settings All 4 dipswitches MUST be set in the OFF (up) position for proper operation. (Fig. A) ALL VEHICLES 5. Installation 1. When making electrical connections it is always recommended that the vehicle’s battery be disconnected from the electrical system before performing the installation. 2. Carefully remove the trim panels covering the 10mm bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media Gateway harness. 3. Disconnect the factory 12-Pin harness (if present) from the back of the radio. Disconnect the antenna from the radio. 4. Connect the 8-Pin iPod docking cable into the first port on the Media Gateway (farthest away from dipswitches). Carefully run the 11 foot iPod cable behind the dash to the location where the iPod will be mounted or stored (for example the glove box or center console). This location will vary based on the vehicle, and the customer’s prefrence. When running this cable through the dash be sure to secure it away from moving parts or sharp metal edges that may damage the cable. 5. If connecting the HD Radio Tuner (HDRT sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) cable into the second port (closest to the dipswitches) on the Media Gateway. Connect the other end of this cable in...