Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Now it is time to consider how you can maximize the fun and excitement your equipment offers. We hope you get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blare or distortion, and, more important, without affecting your sensitive hearing. Sound can be misled. Over time your hearing " comfort level " adapts to higher volumes of sound. So what sounds " normal " can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: Start your volume control at the lowest setting , then slowly increase the sound until you can hear it comfortably and clearly, and without distortion we want you listening for a lifetime. Once you have established a comfortable sound level: Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. ABOUT THIS MANUAL This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. In this operation manual, the Basic Operation for each sound source is outlined at the beginning of its explanation, covering simple operation for that source, such as merely playing music. Remark: In addition to normal audio CD, this unit can play CD-R and CD-R/W disc that contain audio tracks as well; however, depending on the conditions of the recording equipment, recording program or the CD-R as well as CD-R/W disc itself, some CD-R or CD-R/W may not play. When making music CD with CD-R or CD-R/W disc, too high recording speed may result in poor signal quality and therefore, it is recommendable to select 24x or lower speed for CD-R recording and 4x or lower speed for CD-R/W recording. Page 1 LOCATION AND FUNCTION OF CONTROLSSPECIFICATION GENERAL Supply Voltage DC 13.8V. Negative Ground Current Consumption Max.10A Power Output 25Watts X 4ch. Number of channels 2 STEREO channels. Unit Dimensions 178[W] X 165[D] X 50[H] mm. FM SECTION Frequency range 87.5MHz -107.9MHz Effective sensitivity 3uV. I.F Frequency 10.7MHz. AM SECTION Frequency range 530KHz - 1710KHz Effective sensitivity 40dB. I.F Frequency 450KHz RCA LINE OUT (OPTION) Output 1200mV @ CD MAX. CD PLAYER System MP3 Audio System. Suitable CDs MP3/ CD/CD-R/CD-RW Disc Frequency characteristics 20Hz-100Hz < 5dB 10KHz-20KHz <5dB. S/N Ratio to CD 50dB [1KHz] 1. OPEN BUTTON Press the OPEN button to fold down the front control panel. Then a CD can be inserted into the CD slot or ejected by pressing the EJ button at the rear of the front control panel; After flipping down the front panel, pull panel forward to remove it from the chassis. 2.3. SEL BUTTON (Select) AND VOL KNOB a) Press the SEL button briefly, it is activated as selecting each mode of E. VOL. -> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER -> In each mode, the waiting time is about 5 seconds, and the time waiting time is over, it returns to the last display mode of tuner or CDP mode. VOLUME CONTROL 1) The volume can be adjusted at any time by rotating the VOL knob as select mode has been initially defaulted at volume mode. 2)The volume can be also obtained by continuously pressing the SEL button until the character VOL appear on the LCD display, then rotate the VOL knob to adjust the volume. Page 2 Page 13 BASS CONTROL 1) Press SEL button to select the bass mode until BAS appears on the display. 2) Rotate the VOL knob to adjust the bass. TREBLE CONTROL 1) Press SEL button to select the treble mode until TRE appears on the display. 2) Rotate the VOL knob to adjust the treble. BALANCE CONTROL 1) Press SEL button to select the balance mode until BAL appears on the display. 2) Rotate the VOL knob to adjust the left/right speaker balance. FADER CONTROL 1) Press SEL button to select the balance mode until FAD appears on the display. 2) Rotate the VOL knob to adjust the front/rear speaker balance. b) When pressed longer 2 seconds, it is activated as cyclical mode of following functions for user s selection. -> BEEP (2nd/ALL/OFF) ->SEEK1/ 2 -> DSP(OFF/POP/ROCK/CLASSIC/ FLAT) ->VOL LAST/VOL ADJ mode. After selecting the desired mode, rotate the VOL knob to select one setup item of the desired mode. BEEP 2ND, BEEP ALL, BEEP OFF MODE The situation of beep sound is selected. The 3 mode is selected as also rotating the VOL knob. - Beep 2nd mode: The beep is only generated when an allotted double key is pressed long (1 second). - Beep all mode: The beep is generated when every key is pressed. - Beep off mode: The beep sound is disabled ...