Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
F D D The setting is switched in the sequence indicated below each time [MODE] is pressed. 1-track repeat (1 `)( ----------------] 2 One track is repeated. | Register in sequence. v| (The indication “M” and the programmed se All-track repeat (`) | quence appear on the display.) All the tracks on the disc are repeated. | C Changing the sound quality Press during play or stop mode. The setting switches in the sequence indicated below each time [EQ] is pressed. S-XBS ! The setting returns to S-XBS when you disconnect the power source. | ` ` ` ! .You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played. .You cannot select random play or random repeat play during program play. .The resume function does not work when random or random repeat are on. .The mode is canceled when you disconnect the power source. Location of Controls H EQ 3 Repeat steps 1 and 2 to program all the desired tracks. 4 . To program the same track in the sequence more than once . After step 2, press [MEMORY, RECALL] the desired number of times. . If “'” is displayed . No more tracks can be programmed. . To confirm the contents of the program . Press [MEMORY, RECALL] while the disc is playing. (The number of the programmed tracks appear on the display in sequence.) . To delete the entire programmed sequence . Press [.]. Note! The repeat and random play modes are canceled after steps 1 and 2. G MEMORY RECALL C A C ED Side panel of the unit B VOL F HOLD EDC IN 4.5V A YROMEMACEREQ M EDO G H KL M J HOLD E OPEN I N Back panel of the unit B ABC H EQ HOLD VOL D FG E Portable CD player A AStop/operation off button (.) BDisplay CPlay/pause button (1/;) DSkip/search buttons (:, 9) EHeadphone volume control buttons (j, VOL, i) FMode button (MODE) GMemory/recall button (MEMORY, RECALL) HEQ button (EQ) IOpen switch (OPEN1) JHandstrap hole KDC IN jack (K DC IN 4.5 V) LHold switch (HOLD) MHeadphone jack (E) NHole for car mounting base Wired remote control B ASkip/search buttons (:, 9) BPlay/stop/operation off button (./1) CVolume control buttons (j,VOL,i) DHeadphone jack/ earphone jack EClip FHold switch (HOLD) GEQ button (EQ) HPlug 4 Using the Wired Remote Control The remote control can be operated regardless of the HOLD mode of the unit. Basic operation Preparation: Release the remote control from the HOLD mode. EQ HOLD HOLD . Operation confirmation tones When an operation button is pressed, a confirmation tone sounds. Refer to the parentheses in the illustration for the different types of confirmation tones. . Turning the operation tones off and on While stopped or during play Press and hold [EQ] on the remote control for 5 seconds until the unit's display appears. The tone sounds when the setting is changed. To start play Press once during off or stop mode. VOL (Beep) To stop play Press once during play. VOL (Beep...Beep) To turn off the unit Press and hold during play or stop mode. VOL (Beep...Bee...p) Skipping tracks Press during play. (Press [:] twice to skip to the beginning of the previous tracks.) Press and hold during play. VOL Forward (Beep Beep) Backward (Beep Beep Beep) Searching through tracks To adjust the volume VOL VOL .The volume range is 0–25. (Press and hold to change the volume successively.) .A tone (beep-beep) sounds when you reach the minimum or maximum volume. Decrease (Beep) Increase (Beep) EQ EQ Changing the sound quality EQ EQ (Beep) The setting switches in the sequence indicated below each time Press during play or stop mode. To turn the tone off To turn the tone on [EQ] is pressed. S-XBS>TRAIN>Cancel (no indicator is shown) ^==========b S-XBS: Select this setting to boost the low frequency range response. TRAIN: Select this setting to avoid annoying other passengers with noise from your headphones/earphones while riding on the train, or to reduce fatigue when listening for a long period of time. Note! The setting returns to S-XBS when you disconnect the power source. Using the Unit with Optional Accessories Using the unit with an audio system Turn off this unit and the other equipment before connection. 1 Connect the remote control to [E] on the unit. 2 Connect the stereo connection cable to the remote control and the other equipment. .The unit may malfunction if you connect directly to [E] on the unit. .Do not connect the cable to the PHONO jacks on the amplifier. 3 Turn the operation tones off (see above) so they are not heard when you press buttons on the remote control. 4 Set the volume to 10. Make further volume adjustments with the other equipment. Note! .Obtain the optional connecting cable if the other equipment comes with mini-phone jacks. .If you connect speakers (active or otherwise) directly to the unit's headphone jack, ensure they have an impedance of 1 k. or less. L R VOL VOL MEMORY RECALL EQ MODE OPENHOLD E Headphone jack (E) Other equipment (White) (Red) Stereo connection cable (not included) To CD or AUX terminals Using t...