Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
and the track number will appear in the display. CONTINUED ON THE NEXT PAGE 6 OPERATION (CONTINUED) TO PLAY A DISC (CONTINUED) 2 1 5 Adjust the VOLUME control 1 and BASS BOOST button 2 as desired. Press the BASS BOOST button 2 to the “in” position to enhance the bass sound. 1 2 6 To skip forward or backward through the tracks on the disc, press the Skip/Search 1 or 2 button. 1 2 7 To search forward or backward through the playing track, press and hold the Skip/Search 1 or 2 button; a chattering noise will be heard. Stop pressing the button to return to normal playback. When the disc is through playing, it will stop rotating. Press the STOP ( ) but- ton to stop the disc before it is finished. 8 To turn the unit off, rotate the Function control to the OFF position. 9 SEE NOTES ON THE NEXT PAGE 7 OPERATION (CONTINUED) 8 NOTES: • As each track is played, the track number is shown in the display. • To prevent damage to the disc, never open the Disc Compartment door while the disc is rotating. Wait for the disc to stop before opening the Disc Compartment door. Never touch the lens when the Disc Compartment door is open. • DO NOT use the carrying handles when playing a disc. The unit should only be used on a steady surface. OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE/ALL TRACKS 2 3 1 4 1 To repeat a single track, press the REPEAT button 1 once while in the Stop mode; “REP” will appear in the display. Press the Skip/Search 2 or 3 button to select the specific track/file that you wish to repeat. When the desired track number appears in the display press the PLAY/PAUSE button 4 to begin playback. 1 2 2 To repeat all of the tracks on a disc continuously, press the REPEAT button 1 twice while in the Stop mode; “REP ALL” will appear in the display. Press the PLAY/PAUSE button 2 to begin playback. TO RANDOMLY PLAY BACK ALL TRACKS 1 2 1 To randomly play all of the trackson a disc, press the RAND button 1 while in the Stop mode; “RAND” will appear in the display. Press the PLAY/PAUSE button 2 to begin playback. NOTES ON RANDOM MODE: • The unit will play all of the tracks on the disc randomly, and then stop. • To cancel Random playback, press the STOP ( ) button. 9 TROUBLESHOOTING GUIDE Should this unit exhabit a problem, check the following before seeking service: Symptom Possible Cause Solution Radio Noise or sound distorted on radio broadcasts. Station not tuned properly for AM or FM. Retune the AM or FM broadcast station. FM: Antenna Wire is not extended. Extend FM Antenna Wire. AM: Unit is not positioned correctly. Rotate unit until best reception is obtained. AM or FM, no sound. Volume at minimum. Increase volume. Compact Disc Player CD Player will not play. CD is not installed or installed incorrectly. Insert CD with label facing up. CD skips while playing. Disc is dirty or scratched. Wipe disc with cloth or use another disc. General No sound. Power cord disconnected. Connect power cord. No batteries, dead btteries or batteries not installed properly Insert fresh batteries properly. Power is off. Press the POWER button to the in position to turn the unit on. 12 SPECIFICATIONS GENERAL: Power Source ..............................................................................120V, 60Hz AC Battery...........................................................DC 12V, 8 x 1.5V ‘C’ size batteries Alkaline is recommended for longer life Speaker. ....................................................................................................2 x 3W Output Power ............................................................................................2 x 2W RADIO SECTION: Frequency Range (FM)....................................................................87.5–108 MHz Frequency Range (AM) ................................................................530–1720 kHz DISC SECTION: Disc Diameter ...............................................................................4.72" (120mm) 3.15" (80mm) Single CD Optical Source....................................................................Semiconductor Laser Specifications are subject to change without notice. 13 LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the questions you could have in operating the unit. TERMS OF WARRANTY C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 1 year on parts and 90 days on labor. Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items placed in this product...