Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Connect the player to the computer by the supplied USB connection cable. The display on the unit will shows as below and will start to charging automatically: NOTE: 1) For the first time to recharge the build-in battery, charge it at least 10 hours. For normal recharge, it need approximate 4 hours. 2) When the POWER Switch is on the OFF position, the player can’t be charge. TRANSFERRING FILES Before you getting start to playback music, videos or photos, you should transfer those files into the player as: Download the normal music, videos and photos files into the player: The player has two Online Device modes: MEDIA DEVICE and USB Disk, for normal 7 files transferring, set the player in USB DISK mode as: 1. Power on the player by slide the POWER Switch to ON position, the setting manual (FIG. 1) will appear on the display automatically. FIG.1 FIG.2 2. Press the >>I or I<< button to select SETUP then press MENU button to enter. 3. Press >>I or I<< button to select Online Device (FIG. 2) then press MENU Button to enter. 4. Press >>I or I<< button to select USB Disk, press MENU Button to confirmed the selection then press and hold the MENU button to save the setting and exit. 5. After above setting, connect the player to the computer by the supplied USB connection cable. 6. Download the specific files into the player as download the files to others portable device. 7. After downloaded, disconnect the unit from computer. NOTES: ~ All the downloaded files in this setting will stored in the Root Directory in the player. ~ For video files, only AMV video files (with .amv extension) can be playback by the player. For details, please refer to the AMV converter section. Download the DRM-WMA(Digital Rights Management-WMA, songs with copy right protective in WMA format)files into the player: 1. Set the Online Device modes to MEDIA DEVICE as above procedures. 2. Connect the player to the computer with the supplied USB connection cable. The 8 computer will detected the player and show: 3. Select and turn on the Windows Media Player in th SYNC button on the menu bar. 4. Drag the specific DRM songs into the sync list . 5. Double click the Start Sync button on the Windows Media Player to start synchronize the DRM songs into the player. 6. When finished, disconnect the player from the computer. (The operation procedures and the location of control buttons between Windows Media Player 10 and 11 are difference. For details, please refer to the instruction manual of Windows Media Player. ) 7. In this setting, the DRM songs will stored in the Music Folder in the player. IMPORTANT NOTE: 1. The DRM songs only can sync (synchronize) into the player through the Windows Media Player 10 or 11. SYNC button 9 2. Only the Window XP and Vista or latest operation system of computer can installed the Windows Media Player 10 or 11. 3. Do NOT disconnect the player during files transferring. Otherwise, the DRM information in the unit may corrupt, you cannot playback the DRM songs again. In this case, you should deleted all the DRM songs and information in the unit as: 3.1 Connect the player to the computer, delete all the files/folders in the player. 3.2 Disconnect the player from the computer. 3.3 Power on the unit, enter to the setting menu. Press >>I or I<< button to select Remove MTPinfo then press menu button to delete all the internal information of DRM in the player . 3.4 Connect the player to the computer and sync the DRM songs into the player again. Operation system of the computer: 1. Windows Vista and XP: The player can perform all functions. 2. Windows ME and 2000.Mac OS 10.Linux 2.4.2: The normal music, videos or photos files can be download into the player. 3. Windows 98: Before download the normal music, videos or photos files into the player, the drive in the enclosed CD disc should be installed to the computer. Install drive-program at the system of WIN 98 1. Insert the supplied installation CD into the CD Drive in your computer; the List of Folders in the CD will appear on the computer’s screen automatically. 2. Selected the “WIN 98 SE DRIVER” and enter. 3. Selected and double click “setup.exe” and follow the on-screen instructions to install the software. Install AMV Converter and Player in the computer 1. Insert the supplied installation CD into the CD Drive in your computer; the List of Folders in the CD will appear on the computer’s screen automatically. 2. Selected the “MP3 set 4_16” and enter. 3. Selected and double click “setup.exe” and follow the on-screen instructions to install the software. 10 AMV Converter After the installation of the AMV Converter, click “START” on your computer, click “All Programs”, selected and double click “MP3 Player Utilities 4.16” to enter. Then selected and double click “AMV Converter” to run the converter. The follows window will appear on the computer’s screen: NOTE: Before using this converter, press the HELP button on the AMV Converter to read the detail Instruction Manual of the Con...