Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Example: FM 103.5 MHz. 2.) When the desired station appears on the display, press the MEMORY button on main unit top panel or PROG./MEMORY button on the remote control. The “MEMORY” indicator flashes and the “P 1” indicator appears in the display. 3.) Press the MEMORY button on top panel or PROG./MEMORY button on the remote control once more to enter the station in preset memory channel “P 1”. The “MEMORY” indicator stops flashing. 4.) Tune to the next station you wish to memorize. Example: FM 106.7 MHz. Press the MEMORY button on top panel or PROG./MEMORY button on the remote control. The “MEMORY” indicator flashes and the “P 1” indicator appears in the display again. 14 PD6559.60_B102306.p65 14 23/10/2006, 10:14 5.) Press the MEM. UP button on the top panel or remote control to select the next preset memory channel. Example: “P 2”. Press the MEMORY button on top panel or PROG./MEMORY button on the remote control to enter the desired station in preset memory channel “P 2”. 6.) Repeat steps 4 and 5, selecting a different preset memory channel number each time, until you have entered up to 10 FM stations in the tuner memory. 7.) Press the STOP/BAND button to select the AM band and follow the same procedure to enter up to 10 AM stations in the tuner memory. Auto-Preset Function This model includes an Auto-Preset feature which you can use to automatically enter 10 strong FM and AM stations in the tuner preset memory. NOTE: This feature is useful if you live in a rural area with a limited number of stations. However if you live in a major metropolitan area with many strong stations, do not use the Auto-Preset feature. It will memorize the first 10 strong stations it encounters and these will probably not be the same 10 stations that you would select if you were memorizing stations manually. To use the Auto-Preset feature, turn the unit 'On', select the Tuner function and the desired band. Depress and hold the the MEMORY button on main unit, or PROG./MEMORY button on the remote control until the tuner display begins to move, then release the button. The tuner will start searching up the band and it will automatically enter the first 10 strong stations on the selected band in the 10 preset memories. The display will indicate which station is being entered in each of the 10 memories. After the Auto-Preset feature memorizes 10 stations, the tuner returns to preset memory number “P 1”. 15 PD6559.60_B102306.p65 15 23/10/2006, 10:14 Recalling Preset Stations 1.) Press the POWER button to turn the unit ‘On’ and select the desired band. 2.) Press the MEM. UP button on top panel or P-MODE/MEM. UP, MEM. DN buttons on remote control repeatedly to scroll through the preset memories until the display shows the desired station. Changing Preset Stations To change any preset station memory: 1.) Select the desired band and tune to the new station you wish to memorize. 2.) Press the MEMORY button on top panel or PROG./MEMORY button on the remote control. 3.) Press the MEM. UP button on top panel or P-MODE/MEM. UP, MEM. DN buttons on remote control repeatedly to display the memory number you wish to change. 4.) Press the MEMORY button on top panel or PROG./MEMORY button on remote control again to enter the new station in the memory. The new station is memorized and the previous station is deleted from the memory. 16 PD6559.60_B102306.p65 16 23/10/2006, 10:14 Playing Compact Discs IMPORTANT: This CD player can play normal CDs plus CD-R (CD Recordable) and CD-RW (CD ReWritable) discs. However the playability of CD-R/RW discs may be affected by the type of software that was used in ‘ripping’ the tracks from the original discs and ‘burning’ the tracks onto the blank media. Playability may also be affected by the quality and condition of the blank media you use for recording. 100% compatibility cannot be guaranteed. This is not an indication of any problems with your player. 1.) Press the POWER button to turn the unit ‘On’. The display turns ‘On’. 2.) If necessary, press the “FUNCTION” button to select the CD function. The “– –” indicator flashes in the display. 3.) Press the OPEN button on top panel to open the CD door. If you have not already done so, remove the ‘dummy CD’ from the player and discard it. 4.) Place a CD on the center spindle with the printed label side facing upward. 5.) Close the CD door. The disc will spin and “– –” will flash in the display as the player reads the table of contents on the disc. Within a few seconds the disc will stop spinning and the display will show the total tracks on the disc. NOTE: The reading time may be longer if you are using CD-RW discs. This is normal and not an indication of any problem with your unit. 17 PD6559.60_B102306.p65 17 23/10/2006, 10:14 If the disc is inserted upside down or if the disc is badly scratched and unreadable, playback will not be possible. In this case the display will show “– –”. Remove the disc and re insert it properly, or try another disc. 6.) Press the PLAY/PA...