Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Sony Dateigröße: 1.74 mb Dateiname: Unterrichtssprache:

1. Turn over your tablet device, and then remove the Multi Port cover. 2. Connect the HDMI adapter cable (SGPHC1, sold separately) to the Multi Port. 3. Connect a commercially available HDMI cable to the HDMI adapter cable, and then connect to a TV or projector. 4. Connect the supplied USB cable for Multi Port (SGPUC2) to the HDMI adapter cable, and then connect to the AC adapter. HDMI Adapter Cable (SGPTHC1, sold separately) Commercially available HDMI cable Supplied USB cable for Multi Port (SGPUC2) To TV or projector To AC adapter Hint For details on the HDMI adapter cable, see the operating instructions supplied with the HDMI adapter cable. Related Topic Supported Formats Connecting to a Computer Connecting a USB Compatible Device s Front 1. Microphone 2. IR data port 3. Touch screen 4. Front camera lens 5. Ambient light sensor Side 1. (Power) button 2. Notification LED 3. Charge indicator 4. VOL + / – (Volume) button The VOL + button has a tactile dot to help you find the button easily. Rear SGPT12 Rear SGPT12 1. (Headset) jack 2. SD memory card slot 3. Built-in speaker (L) 4. Multi Port 5. Multi Port cover 6. Built-in speaker (R) 7. SD Memory card slot cover 8. Accessory attachment slot 9. Rear camera lens SGPT13 1. (Headset) jack 2. SIM card eject hole 3. 3. 4. SIM card slot 5. Built-in speaker (L) 6. Multi Port 7. Multi Port cover 8. Built-in speaker (R) 9. SD Memory card slot cover 10. Accessory attachment slot 11. Rear camera lens Some models are not available in some countries/regions. Related Topic Turning On or Shutting Down Your Tablet Device Charging the Battery Using the Home Screen s USB Cable for Multi Port AC adapter AC power cord (mains lead) Quick Setup Guide Important Information e Some apps may not support screen rotation. Some apps may rotate the screen in reverse. Be careful not to hold or cover the antennas shown in the figure below while using the Wi-Fi, Bluetooth, GPS, or mobile communications functions. SGPT12 1. Wi-Fi / Bluetooth / GPS SGPT13 1. Wi-Fi / Bluetooth / GPS 2. Mobile communications Do not put your fingernails in the accessory attachment slot or in the groove (shown below) when holding the tablet device. Note Note Some models are not available in some countries/regions. e If your tablet device is not performing as expected, press and hold the power button for about 10 seconds. Note Resetting the tablet device does not revert the settings to factory default, but unsaved data or settings may be lost. Reset the tablet device only when you cannot turn it off. ) By reverting the tablet device factory default, all installed apps and settings will be deleted to give you a “clean” tablet. 1. Tap [ Apps & Widgets] - [ Settings] - [Backup & reset] - [Factory data reset]. 2. Tap [Reset tablet] at the bottom of the menu on the right. All data is initialized and the tablet device automatically restarts. Note It is recommended that you make a backup copy before deleting data in the internal memory [Details]. All data in the data storage area is deleted, including the Google account information, the system data and settings, and any application data you have downloaded. User data such as music, photos, and eBooks imported from an SD memory card or a device connected via USB are not deleted. Related Topic Changing the Settings e Using your tablet device as described below will reduce battery consumption. Reduce the screen brightness. Set a short period of inactivity before the screen turns off (switches to sleep mode) automatically. Turn the screen off (switch to sleep mode) when you will not be using your tablet device. Shut down your tablet device when you do not use it for a long time. Turn on airplane mode to turn off the Wi-Fi, mobile communications or Bluetooth function [Details]. Disconnect USB compatible devices. Turn on the power save mode for the screen [Details]. Related Topic Adjusting the Screen Brightness Turning the Screen On/Off (Sleep Mode) Setting the Time that Elapses Before the Screen Turns Off (Goes to Sleep) Turning On or Shutting Down Your Tablet Device s You can set the screen brightness manually, or set the automatic brightness setting to let the tablet device adjust the brightness automatically. 1. Tap [ Apps & Widgets] - [ Settings] - [Display] - [Brightness]. 2. To adjust the brightness manually, tap or drag the brightness adjustment bar. To adjust the brightness automatically, Tap [Automatic brightness]. A check mark is put in the box for that setting. 3. Tap [OK]. Hint When a check mark is put in the [Automatic brightness] box, the screen may automatically become brighter but not darken. To darken the screen, adjust manually. You can also adjust the screen brightness on the control panel displayed by tapping the status bar. Related Topic Confirming Download or Update Information on the Status Bar ) When you attempt to use Internet telephone or voice chat with 3G, you may not be able to establish a connection. Use Wi-Fi ins...

Herunterladen

Geben Sie zwei Ziffern: