Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
This hand-held computer, having no fan and being almost noiseless, is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conventional notebook computers just cannot measure up. This chapter first tells you step by step how to get the computer up and running. You will find instructions for these procedures: .. Unpacking .. Connecting to AC power .. Turning on the computer .. Turning off the computer Then, you will find a section briefly introducing the external components of the computer. And the last section navigates you to the information you may need after the computer is ready for use. Text Box: CHAPTER Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: .. Tablet PC .. Accessories: . AC adapter (100~240 VAC, 50~60 Hz) . AC power cord (US, CE, UK, SA) . Driver CD . X-Bay (optional): Module-1: two serial I/O / RJ-45 / IEEE 1394 Module-2: wireless LAN (802.11B) Module-3: wireless modem (CDPD) . Expansion box (optional) Port Replicator module: includes COM1/4, PIO1, CRT, two USB ports (connects behind USB hub, FDD bootable), PS/2 keyboard and mouse, MIC input, earphone out, CD-ROM and AC adapter input CD-ROM module: 24X TEAC CD-224E or better DVD-ROM module: 8X Pioneer K-11T or better USB FDD module: 1.44 MB double-sided high density . Wireless keyboard (optional) . Car adapter/charger (10.7~32 VDC) . (optional) . Secondary battery (optional) . Battery charger for secondary battery (optional) . Carrying bag (optional) . CCD camera module (optional) . This Operation Manual Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future. Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer. 1. Make sure the computer is turned off. 2. Plug the DC cord of the AC adapter to the power connector on the right side of the computer (..). 3. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (..). 4. When the AC adapter is connected, the indicator on the AC adapter lights up, indicating that power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION: .. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. .. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. Positioning the Tablet PC The computer can be placed upright using its stand found at the back. To place the computer in an upright position, pull open the stand located at the back as shown on the next figure. NOTE: It is recommended that you operate the Tablet PC in an upright position as opposed to letting it lie flat on its back in order to provide adequate air ventilation. The wireless keyboard operates on four “size-AA” (1.5-volt) batteries on the battery compartment located at the back. Be sure to observe the correct polarity when inserting the batteries. NOTE: The condition of the batteries also affects the effectiveness of transmission. If a weakness in transmission is detected, try changing a set of new batteries. Using the Wireless Keyboard (option) The wireless keyboard can either be placed flat on the table or inclined using its stand found at the back. To place the wireless keyboard in an upright position, pull open the stand located at the back as shown on the next figure. Place the wireless keyboard in front of the Tablet PC with no obstructions between them to allow unhampered communication between the computer and keyboard’s IR port. NOTE: It is recommended that the transmission distance must not exceed 3 meters and that vertical transmission angle is within ± 150 while horizontal transmission angle is within ± 300. Turning On and Off the Computer Turning On 1. Make sure the computer is connected to AC power. 2. Press the power button . 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off To turn off the computer power, use the “Shut Down” command of your operating system. NOTE: There are other ways you can stop the computer so that you will be back to where you left off when you next turn o...