Stimmen - 1, Durchschnittliche Bewertung: 4 ( )

Hersteller: Bissell Dateigröße: 1.76 mb Dateiname: Unterrichtssprache:

Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker. To reduce the risk of fire and electric shock due to internal component damage, use onlyBISSELL cleaning fluids intended for use with the deep cleaner. 10 800.237.7691 ug310-5943_9200_608.indd 10 6/26/08 2:11:47 PM Operation Carpet cleaning (Continued) 6. (Continued) Release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled up appears clean. Continue passes without pressing the trigger until you can’t see any more water being pulled up. After cleaning, you may want to turn the Custom Clean dial to rinse to give your carpeting a final water only rinse. This will ensure thorough removal of embedded dirt loosened by the deep cleaning formula. BISSELL deep cleaning formulas contain an anti-resoiling agent that helps your carpets repel dirt and keeps them looking good longer. 7. Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a bucket to a utility sink or outside where you will dispose of the dirty water. 7a. Unlatch the top of the tank from the bottom by lifting up on the tank latch which is located on the back of the tank. 7b. Remove the top of the tank by lifting up on the handle. Note how the lip on the top tank separates from the groove in the bottom tank. This placement is important when putting the tank back together. 7c. Lift the bottom portion of the tank; pour out dirty water toward the sink through the triangular shaped opening in the corner of the tank. Note: You may notice hair & debris deposits on the carpet or in the tank that were loosened by the cleaning action (especially with newer carpets that have never been deep cleaned before). This debris should be picked up and thrown away. 7d. Fill the heavy duty bladder with clean hot tap water, following instructions 1c through 1e on pages 9 and 10. Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time, and refill as needed. Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty. 7. 7a. 7b. 7c. 7d. 11 800.237.7691 ug310-5943_9200_608.indd 11 6/26/08 2:11:48 PM 8. OR Operation Carpet cleaning (Continued) 8. Water rinse (Optional). Rinsing is an optional step that can be done during the cleaning process by switching from one of the clean settings on the Custom Clean dial to a water rinse setting, or it can be done after the carpeted area has been cleaned. Simply choose the water rinse setting on the custom clean dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the trigger, a backward (wet) stroke, and a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear. Cleaning with attachments Your ProHeat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat 2X. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer. B. Check for colorfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds. 2. Follow the instructions on pages 9 & 10 for filling the 2-in-1 water tank and the formula tank. 3. Set ReadyTools dial to the hose attachments setting. This will allow spray and suction from the hose. Manufacturer’s tag WARNING: To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level. 800.237.7691 12 ug310-5943_9200_608.indd 12 6/26/08 2:11:49 PM Operation Cleaning with attachments (Continued) 4. Set custom clean dial for heavy traffic, normal 5. Cleaning with attachments (Continued) 4. Set custom clean dial for heavy traffic, normal 5. clean, light clean, or water rinse as desired. A...

Herunterladen

Geben Sie zwei Ziffern: