Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
If color comes off on the towel, you may need to have the piece dry cleaned. Window, Glass Surfaces and Mirrors To use the window squeegee, work with the vapor jet down using the top to bottom movements. To do this without leaving streaks, use lateral movements from the top to the bottom of the surface. CAUTION: When cleaning outside windows, always avoid any sudden changes in temperature to prevent breakage or cracks. Soap Scum Soap scum dissolves almost immediately under a combination of heat and moisture. Rinse the surface with a small amount of water afterwards or go back over it once more with a clean terry cloth towel. Notes: Soap scum sometimes will develop a hard surface from waterborne minerals. If this is the case, use the small detail brush first to break up this surface or spray or wipe first with lemon, vinegar or seltzer soda water to soften the minerals. Moving too slowly can dry out the soap scum and cause it to granulate on the surface. The surface will have a gritty feel. If this happens, apply vapor to the surface with the small detail brush again and re-clean. Bathroom Areas To clean the bathtub or shower area, use the small detail brush for grout, shower door tracks, hard to get areas and heavily soiled areas. Allow plenty of time for theheat to penetrate the surface. This is especially helpful in the shower area if there is tile or grout. To clean the toilet, use small detail brush. Use a terry cloth towel or paper towel to wipe up excess moisture and residue. To clean the sink and faucets, use small detail brush. 8 FEATURES OPERATING INSTRUCTIONS FEATURES OPERATING INSTRUCTIONS Small Detail Brush / Angle Adapter Both the angle adapter and the small detail brush can be used on the concentrator nozzle. If using with the concentrator nozzle, push the attachment onto the end of the nozzle. Using the Steam Cleaner With the Hose To attach the hose to the main unit, align the end of the hose that has the two pins with the notches in the nozzle of the unit. Push the hose into the nozzle until it stops against the appliance. Turn in a clockwise direction until it locks in place. To attach the concentrator nozzle or the steam diffuser to the hose, follow the same instructions as above. Cleaning Cloth The cleaning cloth is used with the steam diffuser. Just slip it over the steam diffuser. This can be used to clean upholstery. The SHARK SUPER STEAMER utilizes pressurized steam to remove tough grease,dirt and grime. Steam is nature’s purest and most powerful cleaner for safely cleaning all hard surfaces in your home without harsh chemicals, thus being perfectly ecological. The appliance has various attachments so that it can be used for many purposes such as: 1. Clean upholstery, sealed grout, bathroom/ kitchen tile, stovetops. 2. Easy to clean difficult to reach areas with the angle adapter or concentrator such as faucets, etc. 3. Ideal for windows, mirrors, glass doors, etc. 4. Clean fabrics, window coverings, pillows, bedding etc. 5. Clean hard surface areas such as counters, sinks, shower door tracks, etc. WARNING: The SHARK SUPER STEAMER is designed to clean hard surfaces and upholstery that will withstand high heat. Do not use on soft plastics,unsealed wood and cold glass. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by theheat and steam action. Do not use on unsealed wood. This could cause the wood grain to rise. It is therefore recommended to test an isolated area of the surface to be cleaned before proceeding. CAUTION: Do not plug in the machine during filling. Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps - Do not use an ordinary extension cord. IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use regular water or distilled/purified water if the tap water in your area is veryhard. 7 4 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS How To Assemble & Use CAUTION: Always ensure the unit is “ UNPLUGGED” from the wall receptacle prior to filling or re- filling the water tank. Failure to follow these steps will cause the water tank to overfill. Step 1: Before filling the steam cleaner, make sure that the unit is NOT plugged in. Step 2: Turn Safety Cap counter clockwise until removed. Step 3: Place funnel in the tank and add water. Do not overfill. Replace Safety Cap by turning clockwise - press down firmly to tighten. Heating time is approximately 5-6 minutes. Filling the boiler with hot water will shorten heat up time. Step 4: Plug the unit into a standard 120 volt wall receptacle. The power light willlight up. Step 5: Allow approximately 5-6 minutes for water vapor to reach its working temperature and pressure. Step 6: At the start, some water will come out from the nozzle. This is normal. WARNING: Disconnect steam cleaner from wall outlet before refilling. It is time to refill your steam c...