9. Always allow sufficient time for the Blow Torch to completely cool down before storing. Do not store flammable liquids or materials in the area surrounding the Blow Torch. 10. Maintain labels and nameplates on the Blow Torch. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SKU 91061 PAGE 4 11. Never use gasoline, kerosene, or other highly volatile fluids as a starter as they can explode. 12. Dress safely. Do not wear loose clothing

Serious personal injury and risk of fire may result. Setting up the Soldering Iron: The Torch comes with the “Soldering Iron Adapter” already installed. It is the longer of the two adapters and has a threaded end that receives the soldering tips. If you do need to install “Soldering Iron Adapter”, first remove the “Adapter Lock Nut” then slide the “Soldering Iron Adapter” over the ceramic insulator, then thread on the “Adapter Lock Nut”. Pick the desired tip from the kit and screw it onto the en

a. Contact local solid waste authorities for instructions on correct disposal or recycling of a propane cylinder. Never puncture or set fire to an empty propane cylinder. b. Keep valve protective caps in place when cylinders are not in use. c. Never use a propane tank if it shows signs of: Dents, corrosion, gouges, bulges, fire damage, leakage, excessive rust, or any other form of visual external damage. d. Store propane cylinders properly: • Store the cylinder in a well-ventilated area marked f

(California Health & Safety Code 25249.5 et seq.) Preparing the Soldering Tip 1. Using Wrench (16), check that the Soldering Tip Nuts (2) are not loose. Do not overtighten as you may strip the threads. 2. Set the Soldering Gun on the workbench, and plug the Line Cord into an electrical outlet. 3. Press on the Trigger Switch (12) until the Soldering Tip (1) heats up. 4. Apply a sufficient amount of rosin-core solder to melt over the entire tip of the Soldering Gun. Wipe the tip with a rag until t

Call your local propane supplier for assistance. c. Make sure the Hand Wheel (9) is turned to its “OFF” position and the propane tank (not included) is removed from the Cylinder Connection (3) when the Torch is not in use. d. Never use gasoline, kerosene, or other highly volatile fluids as a starter as they can explode. e. Never leave the Propane Torch unattended once it is lit. f. Keep a fire extinguisher handy. Always keep a commercial fire extinguisher nearby the Propane Torch in case of acci