Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Important Notice: Damages resulting from the disregard of safety and general user instructions found in this user manual are not subject to any warranty claims. ©Elation Professional® 6 impression™ ©Elation Professional® 7 impression™ 3. FIXTURE OVERVIEW 1. Head and Lens Assembly (actively and passively cooled) 2. Arm with various cooling vents 3. LCD-Full Text Display and Menu with Foil Key Pad (data entry) 4. Base with various connectors and Camlock mounting system 5. Power On/Off Switch 6. DMX- Output (3-pin XLR) 7. DMX- Input (3-pin XLR) 8. Fuse Holder and Fuse (GMA 5x20mm, 220V/4A) 9. Main Power Input (Powercon) 10. Safety Cable Slot 1. Head / LED Lens Assembly – The head assembly consist of the main output lenses, and LED cluster module. A high-velocity variable speed fan is mounted in the head to aid in the cooling process. The fan is designed to vary the velocity at different operating temperatures. When the fixture reaches a predetermined internal operating temperature the fan functions at high speeds. The higher speeds provide better cooling associated with higher operating temperatures during long use. When the fixture is operating at a lower temperature the fans operate at low speed. Be sure to keep all vents clean, blocked cooling vents can shorten lamp life and reduce the fixtures reliability. For more information on the fan functions see page 23, section 3.9.7. 2. Arm / Cooling Fan – A high-velocity variable speed fan is mounted in the head to aid in the cooling process. The fan is designed to vary the velocity at different operating temperatures. When the fixture reaches a predetermined internal operating temperature the fan functions at high speeds. The higher speeds provide better cooling associated with higher operating temperatures during long use. When the fixture is operating at a lower temperature the fans operate at low speed. Be sure to keep all vents clean, blocked cooling vents can shorten lamp life and reduce the fixtures reliability. For more information on the fan functions see page 23, section 3.9.7. 3. 4-Segment Menu Display – This display details menu functions. a) Mode Select Button – This button is used to access the fixture’s main system menu and on-board programming functions. b) Enter Select Button – This button is used to select and confirm a menu function when working in the fixture’s operating system. c) Down Select Button – This button is used to scroll backwards when navigating through the system menu. d) Up Select Button -This button is used to scroll forward when navigating through the system menu. 4. Base -This fixture uses an integrated Camlock system for various mounting options built in to the base. The Camlock clamp system allows a quick and efficient means to secure the unit. For proper installation see “Mounting and Installation” on page 12. ©Elation Professional® 8 impression™ 5. Power Switch – The switch is used to control main power to fixture’s electronics. 6. DMX Output Jack – This 3-Pin XLR jack is used to send an outgoing DMX signal. For best results this jack should be terminated if it is the last fixture in a DMX daisy-chain (see termination on page 19). 7. DMX Input Jack – This 3-Pin XLR jack is used to receive an incoming DMX signal. 8. Electronics Fuse Holder – This housing holds a 250v/4A GMA fuse (120v operation). Never defeat this fuse, this fuse is designed to protect the electronics in the event of severer power fluctuations. In the event of fuse failure, always be sure to replace this fuse with an exact match unless otherwise instructed by an authorized Elation technician. 9. Powercon Connector – This power jack is designed to be used only with the Neutrik Powercon adapter included with your fixture. This jack provides main power to your fixture. 10.Safety Cable Mounting Point Connection – The fixture includes two safety cable slots intergraded into the base. Be sure to use these slots as a secondary rigging point to secure the fixture in the event a clamp fails. ©Elation Professional® 9 impression™ 4. FEATURES • Pan 660° / Tilt 300° • 3 operation mode: DMX controlled, stand alone or sound activated • LED RGB Color Additive Color Mixing • User selectable color change (mode 1: full colors, mode 2: split-colors) • Strobe effect: 0~10 flashes per second or random strobe • 90 Bright Luxeon K2 High-Powered LEDs • Dimmer intensity from 0%~100% • Electronic Power Supply (100~240v / 50Hz~60Hz) • Control board with full LCD character display and foil-keyboard • Reversible Display Option (180° Flip) • Auto test for all functions • Automatic Pan/Tilt Correction • 10° Beam Angle • Optional Lens Replacement Kit (25°) • USITT DMX-512 Complaint (3-pin DMX Connections) • Value of each DMX-channel can be displayed • Extremely Light Weight 16.5lbs / 7.5kg ©Elation Professional® 10 impression™ 5. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installat...