Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
5. Go to MENU > INVERT > DIMMER. 6. Select a fader direction (NORMAL or REVERSE). 7. Go to MENU > INVERT > USE. 8. Select YES to activate the new settings or NO to stop using them. . When in NORMAL, the pan, tilt, and dimmer values will increase as the position of the respective fader increases. . When in REVERSE, the pan, tilt, and dimmer values will decrease as the position of the respective fader increases. When it is necessary to limit the pan or tilt range, you can do the following: 1. Go to MENU > RANGE > P/START. 2. Select the starting point for the limited pan (000~255). 3. Go to MENU > RANGE > P/FINISH. 4. Select the finishing point for the limited pan (000~255). 5. Go to MENU > RANGE > T/START. 6. Select the starting point for the limited tilt (000~255). 7. Go to MENU > RANGE > T/FINISH. 8. Select the finishing point for the limited tilt (000~255). 9. Go to MENU > RANGE > USE. 10. Select YES to activate the new settings or NO to stop using them. Q-Wash 260-LED User Manual Rev. 05 -11- Operation It is possible to select how you can reset the product, whether with the DMX controller or only from the control panel. Reset Control 1. Go to MENU > SPECIAL > RESET. 2. Select DMX or SYSTEM. DMX: Enables the DMX controller to reset the product (Control function). SYSTEM: Restricts the reset function to the control panel.. Move-in Black This option allows you to activate or deactivate the move-in black 3-seconds delay. 1. Go to MENU > SPECIAL > BLACK. 2. Select YES to enable the 3 seconds delay or NO to make the blackout immediate. Power You may use this function to boost the output power for specific, short-term applications. 1. Go to MENU > SPECIAL > POWER. 2. Select NORMAL or HIGH. The product will return to Normal if the LEDs’ temperature becomes too high. Color Settings The COLOR setting determines how the Q-Wash 260-LED generates the white color based on various RGB settings. 1. Go to MENU > SPECIAL > COLOR. 2. Select OFF, RGBTOW, or UC. UC: When the RGB faders are set to “255”, the output matches that of less efficient products (Universal Color). RGBTOW: When the RGB faders are all set to “255”, the resulting output is defined by RGB-W (see MENU > EXTRA > CALIB). OFF: When the RGB faders are all set to “255”, the output is maximum, although the resulting white color may not be balanced. -12- Q-Wash 260-LED User Manual Rev. 05 Operation Fan Control Color Calibration White Calibration This option defines how you can control the fan speed, whether with the DMX controller or only from the control panel. 1. Go to MENU > SPECIAL > FAN. 2. Select DMX or SYSTEM. DMX: Enables the DMX controller to control the fan speed (Control function). SYSTEM: Restricts the control of the fan speed to the control panel.. If necessary, you may adjust the color temperature of each of the macros (White1~11). 1. Go to MENU > EXTRA. 2. Press