Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
• The 6330 charger is designed specifically for the 6330 light thus DO NOT attempt to charge any other product because personal injury or property damage may result. • Do not expose to liquids including, but not limited to, water, rain, snow, etc. • Before charging light, assure that the charger base is free of any foreign objects. Foreign objects made of conductive materials can cause an electrical short circuit. • Risk of electric shock of 120V AC at terminal charger is present. Do not probe terminals. • If any part of the unit, light, charger or cord, is damaged, do not attempt to charge; replace immediately. • Do not use an extension cord with the battery charger. • To avoid accidental tripping and/or damage to cord, make sure that the cord is located in an area where it will not be walked over. • Do not pull cord to unplug, pull on plug. Battery Disposal The battery may be regulated by national or local regulation. Please follow the instructions of proper regulation. As electric capacity is left in a discarded battery and it comes into contact with other metals, it could lead to distortion, leakage, over heating, or explosion, so make sure to cover the (+) and (-) terminals with friction tape or some other insulator before disposal. CAUTION Prior to initial use and to ensure proper battery life, this unit must be charged for 6 to 8 hours. • Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year (except where noted on our price schedule) from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The distributor should direct the original user to return the product (with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem. Failures caused by accident, alteration, or misuse are not covered by this warranty. • If one part of this product fails, please do not return the entire product. Astro will replace free of charge component parts of this product that fail within 1 year of first use by the original user. Items included in this category include but are not limited to kits, hand tool kits and any other product where there are multiple items or components that make up the unit. Please contact the phone number below in order to obtain the replacement components covered under warranty. • Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners. • This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you. 1 YEAR LIMITED WARRANTY PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING 1-800-221-9705 FOR INSTRUCTIONS THIS UNIT IS FIELD REPARABLE Page 2 Use 6330CH Charger only with 6330 LED Light 6330 INSTRUCTIONS: • The battery must be charged 6 to 8 hours before using the first time to insure proper operation. • There are 60 LED elements on the light. • Under normal usage the light will remain illuminated for approximately 3 hours after a 6 hour battery charge. • When the battery indicator light is flickering in red light, the battery needs to be recharged. • When the battery is fully charged, the battery indicator light will turn green. • Before storing the light for a prolonged period of time, be sure to fully charge the battery. • Store the light in a dry clean area with the temperature between 32°F (0°C ) and 104°F (40°C). • DO NOT submerge in water. • DO NOT use solvents to clean any part of the light. Clean with a damp cloth and mild detergent. WARNING Unpacking When unpacking, check the parts diagram and part number listing on page 4 to make sure all parts are included. If any parts are missing or damage, please call your distributor. • For safe operation always read, follow, and understand instructions in the manual provided. • The 6330CH charger is designed specifically for the 6330 light thus DO NOT attempt to charge any other product because personal injury or property damage may result. • Do not expose to liquids including, but not limited to, water, rain, snow, etc. • Before charging light, assure that the charger base is free of any foreign objects. Foreign objects made of conductive materials can cause an electrical short circuit. • Risk of electric shock of 120V AC at terminal charger is present. Do not probe...