Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Galileo Dateigröße: 391.05 kb Dateiname: 7878b2b9-e3a4-4485-ab0c-50b1382237f2.pdf Unterrichtssprache:

Date of production: ___ ___ ___ ___ _ Quality Inspector Signature: __ ___ ___ ___ _ _ Quality assurance seal NEWCON ™ 2003 Printed in Canada Operation Manual NIGHT VISION RIFLESCOPE DN482/483 (2+/3 Image Intensifier Tube generation) In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada Tel: ( 416) 663-6963 Fax: (416) 663-9065 Email: NEWCONSALES@NEWCON-OPTIK.COM Web: OPTIK.COM IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted. • NEVER disassemble the unit. This device contains high voltage, which may be hazardous to your health! • NEVER aim active unit at intense light sources (i.e. lights, headlamps, campfires, the moon, etc.) • NEVER reverse the polarity of a battery • NEVER connect the unit to external power sources • ALWAYS remove batteries when not in use for a long period • ALWAYS keep the objective lenses covered when not in use • ALWAYS store in a warm dry place when not in use FEATURES OF THE DN482/483 NIGHT-VISION SCOPE • Long range of vision (400- 700 m) • High photo cathode sensitivity for low light levels (10-3-10-4 Lux - cloudy night sky). • High resolution 18 mm Image Intensifier Tube and special light-collecting optics provide bright, sharp image of consistent quality in the center and on the edges • Recoil proof at large caliber rifles (bullet output energy up to 6500 J) • Lit reticle with manual brightness adjustment • High image quality within the whole field of view 2 11. WARRANTY NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing. Should your Newcon product prove defective during this period, please bring the product securely packaged in its original container or an equivalent, along with proof of the date of original purchase, to your Newcon Dealer. Newcon will repair ( or at its option replace), the product or part thereof, which, on inspection by Newcon, is found to be defective in materials or workmanship. What This Warranty Does Not Cover: NEWCON is not responsible for warranty service should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, damage caused by disasters such as fire, flood, lightning, improper electrical current, or service other than by a NEWCON Authorized Service. Postage, insurance, or shipping costs incurred in presenting your NEWCON product for warranty service are your responsibility. Please include a check or money order made out to NEWCON OPTIK for the amount of $ 10.00 to cover shipping and handling. This covers products shipped in USA or Canada only. 12. CUSTOMER SUPPORT Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at ( 416) 663- 6963 or Toll free at 1- 877398- 6666. Our operating hours are 9am- 5pm, Monday - Friday, Standard East Time. At no time should equipment be sent back to Newcon without following the instructions of our technical support department. Newcon accepts no responsibility for unauthorized returns. To locate NEWCON Authorized Dealer call: Tel: (416) 663-6963 Fax: (416) 663-9065 Email: NEWCONSALES@NEWCON- OPTIK. COM INTERNET: http: / / WWW. NEWCON-OPTIK. COM The defective products should be shipped to: In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada International: 105 Sparks Ave. , Toronto, ON M2H 2S5 Canada 19 10. TROUBLESHOOTING ] The scope does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image. Turning the objective lens ring (10), and/or the eyepiece (3) adjust to achieve the clearest image on the screen. Repeat the steps of focusing if necessary. If the view still does not seem in focus, clean the lenses. They could be foggy or dusty. Image has disappeared. When bright light gets into the objective lens of the night vision device it may result in disappearing of the image as the automatic shut-off feature comes into action to protect the device. Whenever this happens, turn the switch to the OFF position. In a minute or two the device will be ready for further operation. If the image has been lost at the moment of a shot, check contacts in the battery compartment. Condensation accumulates on the parts In order to avoid misting of the eyepiece lens in cold time use special protective covers. Indistinct movement of aiming reticule. When adjusting the scope it is desirable to rotate the screw of hori...

Herunterladen

Geben Sie zwei Ziffern: