. Figure 1-2. Front and Right Side Components Table 1-5 Front and Right Side Components Item Component Function 1 Stereo speakers (2) Produce stereo sound. 2 Power/Standby light On: Power is turned on. Off: Power is turned off. Blinking: Computer is in Standby mode. 1–30 Maintenance and Service Guide Product Description Table 1-5 Front and Right Side Components (Continued) Item 3 4 5 6 7 Component Display release latch Battery light Battery bay Optical drive bay Infrared port Function Opens the

Microsoft and Windows are trademarks of Microsoft Corporation. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. The information in this publication is subject to change without notice and is provided "AS IS" WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE

Steps 3 and 4 signal IRC that you additionally want to hold down the Alt key on the managed server keyboard. Steps 5 and 6 generate a Del key on the managed server keyboard. Since the Del key was preceded by the Ctrl and Alt compose sequences, all three are pressed simultaneously on the server’s keyboard. The Del support sequence, since it is not an attention compose sequence, automatically ends the compose sequence, releasing both the Ctrl and Alt keys following the Ctrl + Alt + Del sequence. C

Compaq, the Compaq logo, and Presario are trademarks of Compaq Information Technologies Group, L.P. in the United States and other countries. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States and other countries. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for

This hardcopy is designed to be placed into a standard 3-ring binder. Provided below is a title block that can be copied and cut out and placed into the slip or taped onto the edge of the binder. Technical Reference Guide Technical Reference Guide The information in this document is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERF

Compaq Deskpro 4000N and 4000S Personal Computers 5-9 First Edition - September 1997 Chapter 5 Input/Output Interfaces Chapter 5 Input/Output InterfacesDISKETTE DRIVE INTERFACE The diskette drive interface supports up to two diskette drives through a standard 34-pin diskette drive connector. All Deskpro 4000S models include a 3.5 inch 1.44-MB diskette drive installed as drive A. There is no physical provision for a second drive (B). The diskette drive interface function is integrated into the 87

Mouse does not respond to movement or is too slow. Mouse will only move vertically or horizontally. Problem Solution Keyboard connector is 1. On the Windows taskbar, click the Start not properly button. connected. 2. On the Start menu, click Shut Down... The Shut Down Windows dialog box is displayed. 3. Select the Shut down option. 4. Click OK. 5. After the shutdown is complete, reconnect the keyboard to the back of your computer and restart your computer. Programme in use has stopped responding

Printers and other accessories should be connected only after computer setup and registration are complete. Illustrations may vary slightly from your Presario Internet PC; follow colour coding to match connectors with their corresponding ports. HINWEISE: Le stampanti e gli altri accessori devono essere connessi solo dopo che le procedure di impostazione del computer e di registrazione sono state completate. Le illustrazioni possono apparire leggermente diverse dal modello Presario Internet PC in

Install the four guide screws (two on each side) that you removed from the old drive into the new drive. The screws help guide the drive into its proper position in the bay. 2. Slide the drive into the drive bay 1, making sure to align the guide screws with the guide slots, until it snaps into place. Sliding the Drive into the Drive Cage 3. Reconnect the power and data cables to your drive as indicated in the following illustrations. Hardware Reference Guide 3–9 Computer Upgrades Reconnecting th

sOÎv/Ri: © 2001 Compaq Computer Corporation. COMPAQ, the Compaq logo, and Presario Registered U.S. Patent and Trademark Office. Second Edition July 2001. Connectors and their locations may vary by model. Please match the correct colored plug to coordinating port. * Powered speakers are required. er~-^ d Voltage ’"Voltage is preset to the correct rating. If in doubt, contact your local Power Utility. ♦ / ♦ Registration / ♦ /