Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Lenovo IdeaPad U350 SP V2.0_EN_p1
Initial setup instructions
Lenovo
1
Install the battery pack
3
Press the power button
IdeaPad U350
1. Insert the bottom end of the battery pack into the battery bay of the
computer.
Setup Poster
2. Press the other end (with the metal contact) until the battery pack
V2.0
clicks into place.
Read the safety notices and important tips in the
included manuals before using your computer.
Attention:
Make sure that the battery latch is in the locked position when instal ing the
battery pack. Attempts to forcibly press the battery pack in while the latch is
in the unlocked position can damage the latch mechanism.
If the latch is in the unlocked position when you attempt to instal the battery
pack, remove the battery pack and the latch should immediately return to
4
Configure the operating system following the
the locked position. Reinstal the battery pack.
on-screen instructions
Unpack
2
Connect to the power
Computer
Battery pack
AC adapter
Power cord*
Optical disk(s)
(specific models only)
Manuals
- Setup Poster
3
- User Guide
- Other publications
* Power cords vary by country/region.
1 Some models may contain items that are not listed.
2 If any item is missing or damaged, please contact your retailer.
Attention:
Lenovo, Lenovo logo, IdeaPad, VeriFace and OneKey are either registered trademarks or trademarks of Lenovo
Connect the power cord to the AC adapter firmly, poor connections may
in the United States and/or other countries.
result in damages to the AC adapter.
P/N: 148001468
Copyright Lenovo 2009.
Printed in China
...