Anleitung Samsung, modell NP270E5GI
Hersteller: Samsung
Dateigröße: 10.6 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Cleaning the LCD panel with excessive force can damage the LCD. 58Chapter 3. Using the computer Wired Network Chapter 3. Using the computer Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. • Since these descriptions are written on the basis of the latest operating system, Windows 8, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions. • The figures used for the description are of a representative model. Therefore the figures may differ from the real ones. Connecting to the Wired LAN 1 1 Connect the LAN cable to the wired LAN port. 2 2 Click Charms menu on the Desktop > Settings > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane. 3 3 Select Ethenet and click the right button of the touch pad and select Properties. The LAN Device name may differ depending on your computer’s Network Device. Wired Network 4 4 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. • The Network Component name may differ depending on the Operating System Installed. • To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. 5 5 Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. 59Chapter 3. Using the computer When not using DHCP, ask your network administrator for the IP address. 6 6 When you have completed the settings, click the OK button. The network settings have been completed. 60Chapter 3. Using the computer Wired Network Chapter 3. Using the computer Wired Network Using the WOL (Wake On LAN) function is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). 1 1 Click Charms menu on the Desktop > Settings > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane. 2 2 Right-click on the Wired Ethernet Connection and select Properties. 3 3 Click Configure > Power Management tab. Select Allow this device to wake the computer, then click OK. Restart the system. -If the system wakes up from Sleep mode even though there is no received signal, use the system after disabling the function. -The LAN LED may not be turned off if System is shoutdown without disabling the WOL (Wake on LAN) option. -Connecting a wired LAN while using a wireless LAN may not activate the function. Set the Wireless LAN to Disable to use the function. - feature may not work while using Hybrid power saving feature. Hybrid sleep mode can be disabled from Power Options under Control Panel. For Windows 8, Wake On LAN is not supported by Ping. When connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN. This happens because when the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps/1Gbps. When system is running on battery, some time it may take a few second extra after inserting LAN cable to be able to connect to internet. This symptom happen as a result of power saving feature to reduce battery consumption. When system is running on battery, the Wired LAN speed is decreased automatically to reduce battery consumption. In such case, a 1Gbps /100Mbps LAN would function at 100Mbps/10Mbps speed. Chapter 3. 61 Using the computer A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. •• The screen figures and terms may differ depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided. •• The descriptions below are for computer models with a Wireless LAN card or device. A Wireless LAN device is optional. The pictures in this manual may differ from the actual product depending on your wireless LAN device model. What is an Access Point (AP)? An AP is a network device that bridges wired and wireless LANs, and corresponds to a wireless hub in a wired network. You can connect multiple wireless LAN installed computers to an AP. Wireless Network (Optional) 62 Chapter 3. Using the computer Wireless Network (Optional) Chapter 3. Using the computer Wireless Network (Optional) Connecting to a Wireless LAN If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connectio...
