Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 1.38 mb Dateiname: Unterrichtssprache:

(This button's actions are similar to using the OK button.) T Teletext TV program mode buttons Red button Press to jump to the red shortcut link in teletext TV program mode. Green button Press to jump to the green shortcut link in teletext TV program mode. Yellow button Press to jump to the yellow shortcut link in teletext TV program mode. Blue button Press to jump to the blue shortcut link in teletext TV program mode. U Teletext TV program mode selection button Press to activate/deactivate teletext TV program mode. 5252n N Using Your VAIO Computer Before you use the remote commander Before using the remote commander, you need to insert the supplied AA manganese batteries and connect the remote sensor to enable communication between the computer and the remote commander. To insert batteries 1 Turn the remote commander over. 2 Press in the tab (1) and lift the battery cover up. 3 Insert the supplied two AA batteries into the remote commander. 4 Align the battery cover to the remote commander. 5 Press down until the cover clicks into place. . If the remote commander does not operate properly, you may need to replace the batteries. When the remote commander has not been used for an extended period of time, remove the batteries to avoid possible damage from battery leakage. 5353n N Using Your VAIO Computer Using PC Cards PC Cards allow you to connect portable external devices to your computer. Inserting a PC Card ! Some PC Cards or their functions may not be compatible with the computer. You do not need to shut down the computer before inserting or removing a PC Card. To insert a PC Card 1 Push the PC Card release button so that the release button pops out. 2 Push the PC Card release button a second time so that the PC Card slot protector pops out. 3 Gently take hold of the protector and pull it out of the slot. 4 Insert the PC Card into the PC Card slot with the front label facing up. 5 Gently push the PC Card into the slot. The PC Card is automatically detected by your system. The Safely Remove Hardware icon appears on the taskbar. 5454n N Using Your VAIO Computer ! Insert the PC Card slot protector to protect against debris entering the slot when not using a PC Card. Before moving the computer, make sure to insert the PC Card slot protector into the slot. . Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer. While the card is inserted, the computer may not enter Hibernate power management mode. It may enter Standby mode. We recommend that you remove the card before the computer enters Hibernate mode. Make sure you use the most recent software driver prov...

Herunterladen

Geben Sie zwei Ziffern: