Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
2. Install the LED cover. 3. Follow the procedures in After Working Inside Your Computer. Speaker Removing The Speaker 1. Follow the procedures in Before Working on Your Computer. 2. Remove the Secure Digital (SD) card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the display-closure sensor. 6. Remove the audio board and the hard drive. 7. Remove the cloth tapes that secures the speaker cable to the computer. 8. Disconnect the touchpad cable from its connector on the system board. 9. Remove the screws that secure the speaker to the computer. 10. Disconnect the speaker cable from the audio board and release it from its routing guides on the computer. 11. Remove the speaker from the computer. NOTE icon NOTE: To replace the speaker, see Installing The Speaker. Installing The Speaker NOTE icon NOTE: To remove or locate the speaker, see Removing The Speaker. 1. Place the speaker into its slot on the computer. 2. Tighten the screws that secure the speaker to the computer. 3. Route the speaker cable back into its routing guide on the computer. 4. Secure the speaker cable to computer, using the cloth tapes provided. 5. Install the audio board and the hard drive. 6. Install the display closure sensor. 7. Install the battery. 8. Install the base cover. 9. Install the Secure Digital (SD) card. 10. Follow the procedures in After Working Inside Your Computer. Display Bezel Removing the Display Bezel 1. Follow the procedures in Before Working On Your Computer. 2. Remove the Secure Digital (SD) card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the wireless local area network (WLAN) card. 6. Remove the wireless wide area network (WWAN) card. 7. Remove the LED cover. 8. Remove the memory. 9. Remove the keyboard. 10. Remove the thermal fan. 11. Remove the system board. 12. Remove the palmrest assembly and display assembly. 13. Remove the screw covers from the display bezel. 14. Remove the screws that secure the display bezel to the display assembly. 15. Using a plastic scribe, pry under the display bezel to release it from the display assembly. 16. Lift the display bezel and remove it from the display assembly. NOTE icon NOTE: To install the display bezel, see Installing The Display Bezel. Installing The Display Bezel NOTE icon NOTE: To remove or locate the display bezel, see Removing The Display Bezel. 1. Align the display bezel with the display assembly and gently snap it into place. 2. Replace and tighten the screws to secure the display bezel to the display assembly. 3. Replace the screw covers. 4. Install the palmrest assembly and display assembly. 5. Install the system board. 6. Install the thermal fan. 7. Install the keyboard. 8. Install the memory. 9. Install the LED cover. 10. Install the wireless wide area network (WWAN) card. 11. Install the wireless local area network (WLAN) card. 12. Install the battery. 13. Install the base cover. 14. Install the secure digital (SD) Card. 15. Follow the procedures in After Working Inside Your Computer. Camera Removing the Camera 1. Follow the procedures in Before Working on Your Computer. 2. Remove the Secure Digital (SD) card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the display bezel. 6. Disconnect the camera cable from the camera module. 7. Using a plastic scribe, pry the camera to release it from the display back cover. NOTE icon NOTE: To replace the camera, see Installing The Camera. Installing the Camera NOTE icon NOTE: To remove or locate the camera, see Removing The camera . 1. Connect the camera cable to the camera. 2. Secure the camera to the display cover. 3. Replace the display bezel. 4. Replace the battery. 5. Replace the base cover. 6. Replace the Secure Digital (SD) card. 7. Follow the procedures in After working inside your computer. Thermal Fan Removing The Thermal Fan 1. Follow the procedures in Before Working On Your Computer. 2. Remove the Secure Digital (SD) card. 3. Remove the base cover. 4. Remove the battery. 5. Remove the audio board and the hard drive. 6. Remove the wireless local area network (WLAN) card. 7. Remove the wireless wide area network (WWAN) card. 8. Remove the LED cover. 9. Remove the memory. 10. Remove the keyboard. 11. Remove the card reader board. 12. Remove the coin cell battery. 13. Remove the system board . 14. Remove the screw that secures the thermal fan to the computer. 15. Lift the fan up and away from the computer. NOTE icon NOTE: To install the thermal fan, see Installing The Thermal Fan. Installing The Thermal Fan NOTE icon NOTE: To remove or locate the heat sink and fan assembly, see Removing the Thermal Fan. 1. Place the fan into its slot on the computer. 2. Replace and tighten the screw to secure the fan to the computer. 3. Connect the thermal fan cable to the system board. 4. Install the system board. 5. Install the coin cell battery. 6. Install the card-reader board. 7. Install the keyboard. 8. Install the memory. 9. Install the LED cover. 10. Install the wireless wide area n...