Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
System Information System chipset Intel® GM45 +ICH9M Data bus width 64 bits DRAM bus width Dual-channel (2) 64 bit buses Processor address bus width 36 bits Flash EPROM 1 MB Processor Processor Intel® Core™ 2 Duo Intel® Celeron™ (Socket P) Level 2 (L2) cache 3 MB or 6 MB Front Side Bus 1066 MHz Memory Memory module connector 2 DIMM slots Memory module capacity 1 GB (one DIMM) 2 GB( one or two DIMMs) 4 GB (two DIMMs) Memory type DDR2 667 or 800 MHz Min to Max Memory 1 GB to 4 GB. To Support 8 GB, requires 64-bit Vista Operating System) Communications Modem: Type v.92 Data/Fax MDC Modem Controller Soft Modem Interface HDA Bus Network Adapter 10/100/1000 Ethernet LAN on system board Wireless Internal support for PCI-e Mini-Card WLAN Bluetooth® V2.0 wireless technology Audio Audio type Two-channel high-definition audio codec (HDA) Audio controller Conexant CX20583-10Z Stereo conversion 24-Bit (stereo digital-to-analog) 24-Bit (stereo analog-to-digital) Interfaces: Internal High definition audio External Microphone-in connector, stereo headphones/speakers miniconnector Speakers One 2-watt speaker Keyboard Number of keys 86 (United States and Canada); 87 (Europe); 90 (Japan) Layout QWERTY / AZERTY / Kanji Battery Type 6-cell "smart" lithium ion Dimensions: Depth 53.39 mm (2.1 inches) Height 20.44 mm (0.8 inch) Width 206.44 mm (8.12 inches) Weight 0.33 kg (0.73 lb) Voltage 11.1 VDC (6 cell) Charge Time (approximate) 4 hours (when computer is off) Operating Time Battery operating time varies depending on operating conditions and can be significantly reduced under certain power-intensive conditions. Life Span (approximate) 300 charge/discharge cycles Temperature Range: Operating 0° to 35°C (32° to 95°F) Storage -20° to 65°C (-4° to 149°F) Coin-cell Battery CR-2032 Physical Height 25 – 35.6 mm ( 0.98 – 1.4 inches ) Width 340 mm ( 13.38 inches ) Depth 242.5 mm ( 9.54 inches ) Weight minimum 2.30 kg (5.066 lbs) with a 6-cell battery Ports and Connectors Express Card Controller Integrated Connector 34-mm ExpressCard slot (USB and PCI Express-based interfaces) Supported card 34-mm ExpressCards Audio One microphone connector One headphone connector IEEE 1394 One 4-pin connector Internal Expansion Minicard Support One dedicated half Mini-Card slot for WLAN Network Adapter One RJ-45 connector USB Four 4-pins USB 2.0 Connectors Video 15-pin VGA video connector 5-in-1 Memory Card Reader Media card controller Ricoh CardReader R5U230 Cards Supported High-density SecureDigital (SD) High-capacity SD Mini SD Micro SD Memory Stick Pro Memory Stick Duo MultiMediaCare (MMC) Video Video type Discrete graphics Back to the top. Data bus PCI Express Graphic Video controller AMD ATI Mobility Radeon HD 4330 Video memory 512 MB DRR2 Video Output VGA Connector Display Type (active-matrix TFT) Two-channel high-definition audio codec (HDA) Active Area 309.4 mm (H) x 173.9 mm (V) Dimensions: Height 192.5 mm Width 324 mm Diagonal 14.14 mm Operating Angle 0° to 135° Viewing Angle: WXGA Horizontal WXGA Vertical 40 / 40° 15 / 30° Pixel Pitch 0.252 Operating Angle 0° to 135° Touch Pad X/Y position resolution (graphics table mode) 240 cpi Size: Width Height 71.2 mm 36.4 mm Camera (optional) Resolution 2.0 MP with integrated microphone AC Adapter Type 90 W Input voltage 100 – 240 VAC Input current (maximum) 1.50 A Input frequency 50 – 60 Hz Ouput current 5.62 A (maximum at 4 seconds pulse) 4.62 A (continuous) Rated output voltage 19.50 VDC +/– 1.0 VDC Operating Temperature 0 to 35°C (32° to 95°F) Storage Temperature –40° to 65°C (–40° to 149°F) Environmental Temperature range: Operating 0° to 35°C (32° to 95°F) Storage –40° to 65°C (–40° to 149°F) Relative humidity (maximum): Operating 10% to 90% (noncondensing) Storage 5% to 95% (noncondensing) Working on Your Computer Dell™ Vostro™ 1088 Service Manual Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: l You have performed the steps in Working on Your Computer. l You have read the safety information that shipped with your computer. l A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse order. To avoid damaging your computer, perform the following steps before you begin working inside the computer. 1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched. 2. Turn off your computer (see Turning Off Your Computer). 3. If the computer is connected to a docking device (docked), undock it. 4. Disconnect all network cables from the computer. 5. Disconnect your computer and all attached devices from their electrical outlets. 6. Where applicable, disconnect any adapters from the computer. 6. Close the display and turn the computer upside-down on a flat work surface. 7. Remove the main...