Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
NOTE: Successful password changes take effect immediately. NOTE: Deleting the admin password automatically deletes the system password as well. Default Setting: Not Set System Password Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system password every time your computer turns on or restarts. NOTE: Successful password changes take effect immediately. Default Setting: Not Set Internal HDD Password This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even when installed in another system. Default Setting: Not Set Password Bypass Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes from standby. You can set Password Bypass to Disabled and Reboot Bypass. NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been shut down. Default Setting: Disabled Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set. Default Setting: Allow Non-Admin Password Changes checked Strong Password Allows you to enable of disable option to enforce strong passwords. If enabled, all passwords set on the computer must contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling this feature automatically changes the default minimum password length to 8 characters. Default Setting: Disabled Allows you to enable or disable the Trusted Platform Module (TPM) on the computer. NOTE: Disabling this option does not change any settings you may have made to the TPM, or delete any information or keys you may have stored there. TPM Security When TPM is enabled, the following options are available: l Deactivate—Disables the TPM. The TPM restricts access to the stored owner information and does not execute any commands that use TPM resources. l Activate—Enables and activates the TPM. l Clear—Clears the owner information stored in the TPM. Default Setting: Disabled Computrace Allows you to enable or disable the optional Computrace software. The options are Deactivate, Disable, and Activate. NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed. Default Setting: Deactivate CPU XD Support Allows you to enable or disable the Execute Disable mode of the processor. Default setting: Enabled Non-Admin Setup Changes Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. If disabled the setup options are locked by the admin password. Password Configuration Allows you to determine the minimum and maximum length of Administrator and System passwords. Admin Setup Lockout Allows you to prevent users from entering Setup when an Administrator password is set. Performance Option Description Multi Core Support Enables or disables multi-core support for the processor. Setting options are: All, 1, and 2 Default Setting: All Intel® SpeedStep™ Enables or disables the Intel SpeedStep feature. Default Setting: Enabled Intel® TurboBoost™ Enables or disables the Intel TurboBoost performance. Default Setting: Enabled Power Management Option Description AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default Setting: Wake on AC Disabled Auto On Time Allows you to set the time at which the computer must turn on automatically. You can set the of days, if any, when you would like the system to turn on automatically. The settings are Disabled, Everyday, or Weekdays. Default setting: Disabled USB Wake Support Allows you to enable or disable the ability of USB devices to wake the computer from Standby. This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the BIOS will remove power from all of the USB ports to conserve battery power. Default setting: Disabled Wake on LAN/WLAN Allows the computer to turn on by a special LAN signal or from Hibernate state when triggered by a special wireless LAN signal. Wake-up from the Standby state is unaffected by this setting and must be enabled in the operating system. l Disabled — Do not allow the system to power on when it receives a wake-up signal from the LAN or wireless LAN. l LAN Only — Allow the system to be powered on by special LAN signals. l WLAN Only — Allow the system to be powered on by special WLAN signals. l LAN or WLAN — Allow the system to be powered on by special LAN or wireless LAN signals. Default setting: Disabled ExpressCharge Allows you to enable or disable the ExpressCharge feature. NOTE: ExpressCharge may not be available for all batteries. Charger Behavior Allows you to enable or dis...