Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
8. Disconnect the display cable. Squeeze the release tabs together, then pull the cable out of the connector. CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. NOTE: The brackets are labeled "L" (left) and "R" (right). CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. 1 M2.5 x 5-mm screws (4) 2 display panel 3 display cover NOTICE: Touch screen display panels include a second cable (touch screen cable) to attach to a touch screen display panel. For non-touch screen display panels, leave the touch screen cable taped to the display cover. 9. For touch screen display panels, disconnect the touch screen cable. 10. Remove four M2 x 3-mm screws from the right bracket and four M2 x 3-mm screws from the left bracket. Replacing the Display Panel and Brackets (E6400 ATG) 1. Replace the four M2 x 3-mm screws on the right display panel bracket and the four M2 x 3-mm screws on the left display panel bracket. 2. Place the display panel upside down on your workspace in front of the display cover. 3. Connect the display cable to the connector on the back of the display panel. 4. For touch screen panels, connect the touch screen cable to the connector on the back of the display panel. 5. Place the display panel in display cover. Use the alignment posts in the display cover to align each bracket. 6. Replace the four M2.5 x 5-mm screws that secure the display panel to the display cover. 1 display cable 2 display connector release tabs 3 underside of display panel 4 touch screen cable (touch screen display panels only) 5 touch screen cable connector (touch screen display panels only) 1 display panel 2 bracket 3 M2 x 3-mm screws (8) CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. NOTICE: On touch screen display panels, use care when installing the brackets. There is a cable that wraps around the side of the touch screen display panel, and the bracket is installed on top of the cable. NOTE: The brackets are labeled "L" (left) and "R" (right). 7. Replace the display bezel (see Replacing the Display Bezel (E6400 ATG)). 8. Replace the display assembly (see Replacing the Display Assembly (E6400 ATG)). 9. Replace the hinge covers (see Replacing the Hinge Covers). 10. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly). 11. Follow the procedures in After Working on Your Computer. Removing the Display Inverter (E6400 and M2400) 1. Follow the instructions in Working on Your Computer. 2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly). 3. Remove the hinge covers (see Removing the Hinge Covers). 4. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400)). 5. Remove the display bezel (see Removing the Display Bezel (E6400 and M2400)). 6. Remove the two M2 x 3-mm screws from the display inverter. 7. Disconnect the two display inverter connectors. 8. Lift the display inverter out of the display cover. Replacing the Display Inverter (E6400 and M2400) 1. Connect the two display inverter connectors to the display inverter. 2. Replace the two M2 x 3-mm screws securing the display inverter. 3. Replace the display bezel (see Replacing the Display Bezel (E6400 and M2400)). CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. 1 M2 x 3-mm screws (2) 2 display inverter connector 3 display inverter 4 display inverter connector CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. 4. Replace the display assembly (see Replacing the Display Assembly (E6400 and M2400)). 5. Replace the hinge covers (see Replacing the Hinge Covers). 6. Replace the bottom of the base assembly (see Replacing the Bottom of the Base Assembly). 7. Follow the procedures in After Working on Your Computer. Removing the Display Hinges (E6400 and M2400) 1. Follow the instructions in Working on Your Computer. 2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly). 3. Remove the hinge covers (see Removing the Hinge Covers). 4. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400)). 5. Remove the display bezel (see Removing the Display Bezel (E6400 and M2400)). 6. Remove the display panel (see Removing the CCFL Display Panel and Brackets (E6400 and M2400) or Removing the LED Display Panel and Brackets (E6400 and M2400)). 7. Remove the two M2.5 x 5-mm screws from the right hinge and the two M2.5 x 5-mm screws from the left hinge. 8. Unthread the cables from each hinge and remove the hinge. Replacing the Display Hinges (E6400 and M2400) 1. Thread the cables into each hinge, then slide the hinge onto the display cover. Use the alignment pins on the display cover to place each hinge. 2. Replace the two M2.5 x 5-mm screws...