Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. The VAIO Channel offers on-line information about your notebook computer and other Sony products that work with your computer. Just click the VAIO Channel button on your Channel Bar to access the . The Club VAIO offers you a full range of tips and tricks at the address: http:\\. The VAIO Link: If you have some problems with your computer, you can contact VAIO Link by telephone, fax or e-mail (see your Customer Service Guide and VAIO Space for phone numbers). Before calling VAIO Link, try to solve the problem by reading your User Guide VAIO MicroNotebook Computer Getting Started (troubleshooting chapter) or the manuals and helpfiles of the peripherals or software. . The Sony e-mail support service answers your questions by electronic mail. Just send your question in an e-mail message, and a Customer Service Analyst will send you a reply with the answer. To send a question to Sony e-mail support, please refer to the instructions in your Customer Service Guide. Getting Help 67 Troubleshooting This section describes how to solve common problems you may encounter when using your computer. Many problems have simple solutions, so try these suggestions before you call VAIO Link. - When you reconnect devices, be sure to turn off the computer as described in “Shutting Down Your Computer” on page 13. If you turn off the computer in other ways, it may result in data loss. My computer doesn’t start . Check that the computer is plugged into a power source and that it is turned on. Check that the power indicator on the front panel of the computer indicates that the power is on. . Check that the battery is inserted properly and that it is charged. . Make sure there is no diskette in the floppy disk drive. . Confirm that the power cord and all cables are connected firmly, as described in “Connecting Peripheral Devices” on page 33. . If you plugged the computer into a UPS, make sure the UPS is turned on and working. . If you are using an external display, check that it is plugged into a power source and turned on. Check that the brightness control is adjusted correctly. See the manual that came with your display for details. . Moisture condensation may have occurred. Do not use the computer for at least one hour and then turn on the computer. My LCD does not display anything . Check that the computer is plugged into a power source and that it is turned on. Check that the power indicator on the front panel of the computer is on. . Check that the battery pack is inserted properly and that it is charged. . The computer may be in LCD (Video) Standby mode. Press any key to activate the display. . The video output may be directed to an external display attached to the port replicator. Press Fn+F7 until video output appears on the LCD. 68 68 VAIO MicroNotebook Computer Getting Started The screen image on my external display is not centered or sized properly Use the controls on your external display to adjust the image. See the manual supplied with your display for more information. Movements of the displayed images are awkward (not smooth). Use the PowerPanel to select Change CPU Speed. Remove the check from Auto and set Speed Controller to 100%. The video image on my screen is too dark If an external display is connected to the Monitor connector, disconnect the display. My computer “locks up” . Try restarting the computer. On the Windows taskbar, click the Start button, click Shut Down, and then click Restart the computer. . If you cannot restart as described in the preceding step, you can restart the computer by pressing Ctrl+Alt+Delete twice. . If the previous step does not work, slide the power switch toward the front and hold it for four seconds. This turns off the power. . If your computer locks up while playing a CD-ROM, stop the CDROM, and restart the computer by pressing Ctrl+Alt+Delete twice. - Pressing Ctrl+Alt+Delete twice or turning off the computer with the power switch may result in data loss in files that are currently open. My software program “locks up” or crashes Contact the software publisher or designated provider for technical support. See “About Your Sony Notebook Computer” for a complete list of adresses. I cannot play a CD-ROM disc . Make sure that the switch of the CD-ROM drive is turned on. . Make sure the label of the CD-ROM is facing up. . If the CD-ROM disc requires software, make sure the software is installed according to the program’s instructions. . Moisture condensation may have occurred. Disconnect the CD-ROM drive and disconnect the power to the drive for at least one hour. . Make sure the CD-ROM drive is properly connected. See “Connecting the CD-ROM Drive” on page 36. . Make sure the computer is turned on. Getting Help 69 When I click an application icon a message appears, such as “You must insert the application CD into your CD-ROM drive”, and the software does not start q Some titles require specific files that are located on the application’s CD-ROM disc. Insert th...