Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 2.59 mb Dateiname: Unterrichtssprache:

The on/off light pulsates amber indicating the machine is in Standby mode. NOTE: To turn the computer completely off, press and hold the power button until the computer stops beeping (4-5beeps). You may configure your Tecra 8100 for additional Suspend/ Standby options. For more information, see “Starting where you left off” on page 93. Part I: Getting to Know Your Computer Getting Started Getting Started When and how to turn off the computer Turning off the computer for a long period of time To leave the computer turned off for a longer period, use the Windows Shut Down command. To shut down Windows 98 Second Edition and turn off your computer: Click the Start menu, then Hibernate, or select Start, then Shut Down. If you select Hibernate, the computer saves the current state to disk and turns itself off. If you select Shut Down, the Shut Down dialog box appears. Shut down the computer (Windows 98 Second Edition) Select Shut down and click OK. The computer shuts down and turns itself off. Part I: Getting to Know Your Computer 28 28 28 When and how to turn off the computer To shut down Windows NT and turn off your computer: 1 Click the Start menu, then click Shut Down. Shut down the computer (Windows NT) 2 Select Shut down the computer, then click Yes. Windows NT shuts down. A message tells you to wait while data is saved to disk. Then the computer switches itself off. There are a few additional things to keep in mind when you turn off the power. . Never turn off the power while the hard disk drive light or the SelectBay drive light on the system indicator panel is on. Doing so may damage your hard disk, diskette drive, or DVD/CD-ROM drive. . If you close the display panel while the computer is on, the Panel Close Alarm beeps loudly. . You can turn off the Panel Close Alarm using Toshiba Hardware Setup’s Hardware Alarm tab in Windows 98 Second Edition, or TSETUP in Windows NT. Part I: Getting to Know Your Computer Getting Started Getting Started When and how to turn off the computer Part I: Getting to Know Your Computer Chapter 3 Chapter 3 Using an external keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Using a mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Connecting a local printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Connecting the external diskette drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Connecting external speakers or headphones . . . . . . . . . . . . . . . . . . . . . . 40 Connecting an external microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Using an expansion device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Adding memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Swapping SelectBay modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Inserting and removing PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Connecting a modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Connecting Other External Devices This chapter describes how to connect devices that can increase the capabilities of your Tecra computer. Using external display devices Your Tecra computer comes with a built-in LCD display, but you can also connect three different types of external display devices to one of two available video ports: . A television via the composite video port. TECHNICAL NOTE: In Windows 98 Second Edition, you don’t need an Internet connection to watch cable or broadcast TV, but you must purchase a compatible TV tuner card. . A video display device, such as a video projection unit via the composite video port. . An external SVGA monitor via the monitor port. 31 32 32 32 Using external display devices Before connecting your television, video projector, monitor or other display device, configure your computer for the type of device you’re connecting. To do this, refer to your operating system documentation. Connecting the display device If you’re connecting a television or other video display device to the computer’s composite video port, refer to the following section for guidelines on choosing a video cable, then refer to “Connecting to the composite video port” on page 33. HINT: You may choose to have both the LCD display and an external video device display simultaneously. This isavailable only if you’ve set the Controller Option to Dual Controller. Set the S3 Savage/MX video controller option by clickingStart, Settings, Control Panel and clicking Display Properties. Choose the Settings tab, click the Advanced Properties button and select S3 Dual View. If you’re connecting an SVGA monitor, skip to “Connecting an external monitor” on page 33. Selecting video cables To connect a device to the composite video port, you need a composite video cable. For the best vide...

Herunterladen

Geben Sie zwei Ziffern: