Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Toshiba Dateigröße: 3.26 mb Dateiname: Unterrichtssprache:

2 Gently press the card inward to release it. The card pops out slightly. 3 Grasp the card and pull it straight out. Sample removing memory media Do not remove memory media while data is being written or read. Even when the Windows message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the indicator light to go out. Exploring Your Computer’s Features 149 Using the Ultra SlimBay Using the Ultra SlimBay The Ultra SlimBay gives you additional flexibility. By inserting and removing Ultra SlimBay modules, you can configure your computer for the task at hand without having to carry unnecessary components with you when you travel. For example, any one of several modules can be used in the Ultra SlimBay: . Optical drive . Multi-function drive . Secondary hard disk drive (HDD) . Secondary battery HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit accessories.toshiba.com. Removing a module from the Ultra SlimBay NOTE Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. 1 Do one of the following: . Turn off the computer. . Leave the computer on and hot swap the module. First, stop the module by clicking the Safely Remove Hardware icon on the System tray, then selecting the module to be removed. If the system is unable to prepare the module for safe removal, a message will tell you to try again later. If the module can be removed now, the system Exploring Your Computer’s Features 150 Using the Ultra SlimBay displays Safe to Remove Hardware. After the module is stopped, it is safe to remove it. Before you turn the computer over, make sure that the computer display is properly closed and is not in tablet mode. Setting the computer down on the display may cause damage to the screen. 2 Slide the Ultra SlimBay release toward the back of the computer. Sample sliding the release latch 3 Slide the Ultra SlimBay out of the computer. Front of computer Exploring Your Computer’s Features 151 Using the i.LINK® port Front of computer Sample sliding out the module Inserting a module into the Ultra SlimBay To install a module into the Ultra SlimBay, simply slide the module all the way into the Ultra SlimBay until the latch locks into place. Using the i.LINK® port The i.LINK® port on the left side of the computer provides an extremely fast data transfer rate. In addition to high speed, the i.LINK® port also supports isochronous data transfer (the delivery of data at a guaranteed rate). This makes it ideal for devices that transfer high levels of data in real-time, such as video devices. As with USB ports, the i.LINK® port supports both Plug-and- Play (automatic configuration) and hot swapping (the ability to connect and disconnect devices while the computer is on). Exploring Yo...

Herunterladen

Geben Sie zwei Ziffern: