Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Toshiba Dateigröße: 2.83 mb Dateiname: Unterrichtssprache:

Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost. In either of the above cases, the Standby configuration will not be saved. The following message appears when you turn on the power: Warning: Resume Failure Press Any Key To Continue If the computer hangs up when you turn it on, perform the following: Press the power button and hold it down for at least ten seconds, then turn the power on again. 60 Getting Started Adding memory (optional) 2 3 Pull the clips away from the memory module. The memory module pops up slightly. Gently lift the memory module to a 45 degree angle and slide it out of the slot. Front of computer Sample removing the memory module 4 Replace the memory module slot cover and tighten the screw. 5 Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 120. 6 Turn the computer right side up. 7 Reconnect the cables. 8 Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Getting Started 61 Using the TouchPad™ Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 Click Start, Control Panel, Performance and Maintenance, and then System. 2 The General tab view automatically appears and shows total memory. If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and check that the module is inserted completely into the socket and lined up squarely with the socket clips. Using the TouchPad™ The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you would like to move the cursor: . To move the cursor to the top of the page, push your finger forward on the TouchPad. . To move the cursor to the bottom of the page, drag your finger toward yourself. . To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right. . To move it to the left side, slide your finger from right to left. NOTE Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. 62 62 Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control...

Herunterladen

Geben Sie zwei Ziffern: