Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 3.71 mb Dateiname: Unterrichtssprache:

The virtual buttons at the top of the Dual Mode Pad have the following default settings: . Left button: Opens the assigned email application . Middle button: Opens the ConfigFree utility (see the Toshiba online Help for more information) . Right button: Sends the item in the active window to the printer The other three virtual buttons have no default settings. You must configure these buttons in the Mouse Properties dialog box before they can be used. 66 66 Getting Started Using the Dual Mode Pad In order to use the virtual buttons you must first enable Dual Mode in the Mouse Properties dialog box. After that, you can use the virtual buttons as follows: 1 Tap the mode switch button to enable the virtual buttons. 2 Tap the virtual button assigned to the application you wish to launch, or slide your finger on the volume control bar to adjust the volume to the desired level. 3 When the operation is complete, the Dual Mode Pad automatically disables the virtual buttons. The virtual buttons cannot be used until the mode switch button is tapped again. The virtual buttons and Dual Mode can be enabled or changed in the Mouse Properties dialog box. Enabling Dual Mode To enable Dual Mode: 1 Click Start, and then Control Panel. The Control Panel window appears. 2 Click Mouse. The Mouse Properties window appears. 3 Click the Device Settings tab, and then Settings. The Properties for Synaptics LuxPad window appears. 4 In the left side of the window, select Tapping. 5 Select Dual Mode. 6 Select Switch to Button Mode by tapping in the upper-right corner. NOTE To force the Dual Mode Pad to use Button Mode only whenever an external pointing device such as a mouse is plugged in, select Always in Button Mode when an external device is plugged in. Configuring virtual buttons The virtual buttons at the top of the Dual Mode Pad are pre- configured for the Email, ConfigFree, and Print functions. You can assign different functions to these buttons if you wish. The virtual buttons on the bottom of the Dual Mode Pad (buttons 4, 5, and 6 in the Properties for Synaptics LuxPad window) are Getting Started 67 Using external display devices unassigned by default. In order to use one of these buttons, you must first configure that button so that it is associated with a function. To configure a virtual button: 1 Perform steps 1-5 in “Enabling Dual Mode” on page 66. 2 Select the virtual button you wish to configure. 3 Select the desired options, and then click OK. 4 Click OK. 5 Click OK to close the Mouse Properties window. Using external display devices Your computer comes with a built-in display panel, but you can also connect an external display device to an available video port, as follows: . An external monitor or projector via the RGB (monitor) port . A TV, VCR, or DVD recorder via the S-video (TV-out) port Before connecting an external monitor or video projector, configure your c...

Herunterladen

Geben Sie zwei Ziffern: