Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. ESD can damage memory modules and other components. Install the memory module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure. Upgrading Your VAIO Computer > Adding and Removing Memory n 99 N . Do not open the memory module package before you are ready to change the module. The package protects the module from ESD. . Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD. . Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your computer will result in damage to the computer and any repair costs will not be covered by the warranty. . Do not place the memory module in a location subject to: . Heat sources such as radiators or air ducts . Direct sunlight . Excessive dust . Mechanical vibration or shock . Strong magnets or speakers that are not magnetically shielded . Ambient temperature of more than 35°C or less than 5°C . High humidity . Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the components and circuit boards inside your computer. Upgrading Your VAIO Computer > Adding and Removing Memory n100 N Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait about an hour until the computer cools down. 4 Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module compartment cover. Touch a metal object to discharge static electricity. Upgrading Your VAIO Computer > Adding and Removing Memory n101 N Remove the currently installed memory module as follows: . Pull the latches in the direction of the arrows (1). The memory module is released. . Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). Remove the new memory module from its packaging. Upgrading Your VAIO Computer > Adding and Removing Memory n102 N Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any components on the motherboard other than the memory module. If you want to install only one memory module, be sure to use the lower slot. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module. Replace the memory module compartment cover. 10 Tighten the screw on the bottom of the computer. 11 Reinstall the battery pack and turn on the computer. Upgra...
Dieses Handbuch ist für folgende Modelle:PC Notebooks - VPCEA1C5E (2.09 mb)
PC Notebooks - VPCEA1S1E_B (2.09 mb)
PC Notebooks - VPCEA1S1E_G (2.09 mb)
PC Notebooks - VPCEA1S1E_L (2.09 mb)