Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Enter the Windows user name and password without using the SD memory card. After logging on, set the same user name and the password on the SD memory card and Windows, using one of the following operations. • Change the setting of the SD memory card side by [SD Card Setup]. • Change the setting of the Windows side by [Control Panel]. Fast User Switching Function Some applications may not work properlyWhen switching to a different user with the Fast User Switching function, the following problems may occur. • Some applications may not work properly. • Key combination with Fn may not work. • It may not be possible to set the settings of the display. • The wireless LAN cannot be used. • The B’s CLiP icon will no longer be shown on the taskbar and B’s CLiP cannot be used. In this case, log off all users without using Fast User Switching function, and try the operation once more. If the problem persists, restart the computer. RAM Module You do not know the available RAM module page 21 Cannot tell whether the RAM module has been correctly installed You can check whether the RAM module is recognized using [Information] menu in the Setup Utility. If the RAM module is not recognized, turn the computer off and reinsert the RAM module. The RAM module has not been recognizedMake sure the RAM module has been properly inserted. Use the RAM module that supports the recommended specifications ( page 21). Others No response Press Ctrl + Shift + Esc to open Task Manager and close the software application which is not responding. After shutting down by sliding the power switch for more than four seconds, slide the power switch to power on and open the application again. If the program no longer works normally, select [start] - [Control Panel] - [Add or Remove Programs] to delete the program. Then reinstall the program. When trying to play back Some video files use a Codec that is not installed as a standard. In these cases, if you play video files using Windows® back the video file after connecting to the Internet, the Codec may be downloaded auto- Media Player, the message matically, allowing you to play back the file. [Codec required] appears, and the file cannot be played back The shortcut icon for the Windows® Media Player is not displayed on the desktop Start up Windows® Media Player from [start] - [All Programs]. Also, you can copy the icon from [All Programs] list to the desktop and use this icon to start Windows® Media Player. Two shortcut icons for the Windows® Media Player are displayed on the desktop Did the user who first accepted the Windows® Media Player license agreement have the administrator authority? Two icons will be displayed until someone with the administrator authority accepts the license agreement, but either icon can be used to start the program. Cannot operate Fn key In [Main] menu of the Setup Utility, is [Fn / Ctrl key] set to [Replace]? Return the setting to [Normal], or press Ctrl instead of Fn if you want to leave the setting in the [Replace] position. Troubleshooting 33 Reinstalling Software When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on your hard disk to another media or to an external hard disk before running the reinstallation procedure. The reinstallation procedure will return the computer to its original condition. Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost. (This is not the case when Windows is reinstalled in the first partition.) • If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure. Before Reinstallation Preparing You will need the Product Recovery DVD-ROM (included). Important Before the reinstallation procedure, remove all peripherals. Be sure the AC adaptor is connected until the reinstallation procedure is completed. Even if reinstallation is executed, the number of times that the DVD video region code can be set will not be returned to Reinstalling the state set at the time of factory shipment. 1 Turn on the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password. If [CD/DVD Drive Power] has been set to [Off] in the [Main] menu, refer to operations in “When disc cover does not open” in Step 4. 2 Write down all of the contents of the Setup Utility and then press F9 . At the confirmation message, select [Yes] and press . Enter 3 Select [Boot] menu, then select [CD/DVD Drive] and press until [CD/DVD Drive] is at the top of the [Boot] menu. F6 4 Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW drive. When disc cover does not open: Execute Step 5. v After restarting the computer, immediately execute Step 1. v Place the Product Recovery DVD-ROM, and execute Step 5. 5 Press F10 . At the confirmation message, select [Yes] and press . The com...