Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
This is not a malfunction. The afterimage will disappear when a different screen is displayed. High-precision and advanced technologies are necessary in the production of color liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the picture elements either fail to light or remain constantly lit (that is, more than 99.998% of elements are functioning properly), no defect is considered to exist. The external display no longer displays properly When an external display not compatible with the power saving mode is used with the computer, the external display may no longer display properly when the computer enters the condition the power of the display is OFF (for energy conservation purposes). In such cases, turn off the power to the external display. The screen becomes disordered Changing the number of colors of the display may affect the screen. Restart the computer. During simultaneous display, the screen of the external display becomes disordered Try changing the display by pressing ( Fn ) + ( F3 ) . When setting the screensaver, an error may occur during a resume operation When the computer enters the standby or hibernation mode while the screensaver is running, an error may occur during a resume operation. In such cases, turn off the screensaver or try changing the pattern of the screensaver. When an MPEG file is being played with Media Player, the display destination cannot be switched using (Fn)+( F3J Set the following setting to [OFF]. tWin35ws>2000* [Start] - [Settings] - [Control Panel] - [Display] - [Settings] - [Advanced] - [Lynx3DM+] [Stretch] tW inflow SÏX Rf [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] -[Lynx3DM+] - [Stretch] 22 Shutting down Windows cannot be shut down or restarted • Do not shut down Windows during music playback. • If a USB device is connected, try removing it. Battery Indicator The red indicator lights Repeated beeping sound while the computer is in use The battery level is low. Save your data and power off your computer. After connecting the AC adaptor or replacing the battery pack with a fully charged one, turn your computer on. The red indicator blinks • The battery pack or recharging function may be defective. Quickly remove the battery pack and disconnect the AC adaptor, then connect them again. • If the problem persists, contact Panasonic Technical Support. The orange indicator blinks Unable to charge because of an improper temperature range. (GP Page 5) Connecting Peripherals A USB device does not work Some USB devices may not operate properly when connected to the right side USB port. In this case, try connecting the device to the left side port on the computer. Reference Manual The Reference Manual is not displayed Is Acrobat Reader installed? If Acrobat Reader is not installed, run [c:\util\reader\ar500enu.exe]*1 in [Start]*2 - [Run] to reinstall the program. When installing the program, do not change the installation destination folder. If the destination folder is changed, the Reference Manual cannot be opened from the [Start]*2 menu. *1( ) :[c:\util\reader\ar505enu.exe] *2 f ii.t/trr: rcwrra vj •JT>l ; [start] Fast User Switching Function CWincJowsJXRit Some applications do not work properly When switching to a different user with the Fast User Switching function, the following problems may occur. • Some applications may not work properly (for example, PDF files may not be printed properly). • Key combinations with C Fn ) may not work. • It may not be possible to set the settings of the display. If any of the above occur, log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more. # Others Computer hangs Press( CtrD+( Shift )+C~Esc~)to open Task Manager and close the software application which is not responding. After cutting the power by sliding the power switch for more than four seconds, slide the power switch to power on and open the application again. If the program no longer works normally, delete the program using the following menu: ^ : [Control Panel] - [Add/Remove Programs] () : [Control Panel] - [Add or Remove Programs] Then reinstall the program. 23 Troubleshooting Troubleshooting Reinstalling Software Before Reinstallation Preparing • BACKUP DISK(s) created in advance (Q3 page 12) • Product Recovery CD-ROM (included) • USB floppy disk drive (optional CF-VFDU03) • CD drive Panasonic KXL-RW10A (PC Card-compatible) or KXL-RW21A (USB) When using a PC Card-compatible CD drive other than the Panasonic KXL-RW10A CD drive: page 25 ^note> If you have not created the FIRSTAID FD, you can create by using the following menu: [Create Backup Disk] in [Start] - [Programs] - [Panasonic], [Create Backup Disk] in [start] - [All Programs] - [Panasonic]. 4Winclows}20001 CWinciSwslXR) If you can not create this disk, contact Panasonic Technical Support. V- Important • Save all imp...