Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Select [No], then click [Next], 17.The following message will be displayed: [...select real-mode PC card driver .....?]. Select [No], then click [Next], 18.In the final window, click [Finish). 19.The following message will be displayed: [Would you like to shut down your computer now ?]. Click [Yes]. 20.Remove the CD-ROM drive after the computer power is turned off. 21 .Turn on the computer. When Windows 95 opens, insert Drivers Disk l which you created earlier in the floppy disk drive. 22.Click [Start], then [Run], 23.Type "A:\PCCARDUP", under [Open] then click [OK|. 24.When [Windows 95 Update] window is displayed, click [Yes], 25.When [Version Conflict] window is displayed, click [Yes]. 26.When [Update complete!] is displayed, click [OK]. 27.Click [Start], then [Run]. 28.Type "A:\CARDBUPD", under [Open] then click [OK]. 29.When [Windows 95 Update] window is displayed, click [Yes]. 30 .When | Version Conflict] window is displayed, click [Yes]. 31 .When [Update complete!] is displayed, click [OK]. 32.Click [Start], then [Run]. 33.Type "A:\PCIUPD", under [Open) then click [OK]. 34.When [Windows 95 Update] window is displayed, click [Yes]. 35.When [Version Conflict] window is displayed, click [ Yes]. 36.When [Update complete!] is displayed, click [OK]. 37.Remove Drivers Disk 1 from the floppy disk drive. 38.Click [Start]-[Shut Down], select [Restart the computer] and click [YES|. 62 6 Install the video driver and enter screen settings 1 .Insert Drivers Disk 1 which you created earlier in the floppy disk drive. 2.Double-click [Display] in [Control Panel]. 3.Click [Settings] under [Display Properties], then click on [ Advanced Properties]. 4.Click [Adapter] under [Advanced Display Properties], then click [Change]. 5.Click [Have Disk] in the [Select Device] window, 6.Verify that [A:\] is set under (Copy manufacturer's files from], then click [OK]. 7.Verify that [NeoMagic MagicGraph 128ZV] is displayed, then click [OK]. (The driver will now be copied.) 8.Click [Monitor] under [Advanced Display Properties] then click [Change]. 9.Under [Model], select [SuperVGA 1024x768], then click [OK], 10.Click [Performance], then select [Apply the changes without restarting], 11.Click [Adapter], select [Adapter default] under [Refresh rate], click [Close], then click [OK]. 12.The following message will be displayed: [These settings will take effect when your computer is restarted.]. Click [OK]. 13.Enter the following settings in [Settings] window under [Display Properties). Parameter Setting Color palette High Color (16 bit) Desktop area 800 by 600 pixels Show settings icon on task bar Enabled (enter a check mark) 14.After entering the settings, click [Close], 15.Remove Drivers Disk 1 from the floppy disk drive, then click [Yes] to restart. 63 Reinstalling Software 7 Install the YAMAHA sound card driver 1.Double-click [System] in [Control PanelJ 2 Click [Device Manager] under [System Properties] 3 Delete four devices in the following sequence from [Sound, video and game controllers] (1) Gameport joystick (2) MS Windows Sound System Compatible (3) MPU-401 Compatible (4) Creative Labs Sound Blaster Pro 4.If the [Restart9] message is displayed, click [Yes] If the message is not displayed: Click [Start], then [Shut Down] Select [Restart the computer] and then click [YES] 5 When [Update Device Driver Wizard] window is displayed insert Drivers Disk I which you created earlier in the floppy disk drive then click [Next] 6 Check whether (YAMAHA OPL3-SAx Sound System] has been found, then click [Finish] 7 Click [OK] when the insert disk message is displayed 8.Type "A \” under [Copy files from], then click (OK] 9.1nsert Driver Disk 2 as instructed by the screen message 10.After returning to the Windows screen remove Driver Disk 2 11.Double-click [OPL3-SA\ Config] in [Control Panel] and enter the vanous sound settings 12 Double-click | Power] in [Control Panel] 13 Click [OPL3-SAx power management] and enter a setting for [Level of power consumption] The default setting at purchase is [Intermediate level of power save] Xnote> Set the level to [Minimum level of power save] or [Non Power Save mode] in order to output audio through the computer's speaker from PC Cards such as modem cards With the [Maximum level of power save] setting, audio from the speaker may be output when the sound controller enters low power mode or is restored 64 8 Change the hard disk controller Under the default setting, a [Single fifo] driver is installed. Change this to a [Dual fifoj driver. 1 .Double-click [SystemJ in [Control Panel]. 2.CIick [Device Manager] in [System Properties], 3.Select [Standard Dual PCI IDE Controller] from [Hard disk controllers], then click [Remove]. Click [OK] after verifying the selection is correct. 4.Click [Yes] in [System Settings Change] window, then restart the computer. The new controller will be detected when Windows 95 restarts. 5.Click [No] in the first [Sy...