Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Perform the operation in step(?) . /noté) 12 -Label-side up Insert the shutter-side headfirst. Eject Button ® Select [Next] at the [Card Executive 2-.0 for NT Diagnostics]. /note)--- ^The diagnostics may take about two minutes.__ (18) Select [Next], then select [Finish], Windows will restart. _ Select "Windows NT Workstation Version 4,00" and press C Enter). (g) The [Begin Logon] display will appear. Perform the operation in step(g) . ^ Double-click the [Internet Explorer] icon to install Internet Explorer. Follow the on-screen instructions. (|l) Set the correct settings for all items in |Control Panel]-[Regional Settings] and [Date/ Time) etc. Be sure to perform [Calibration] in [Start] - [Settings] - [Control Panel] - [Mouse] -[TouchscreenJ, so that when you touch the display, that touch will correspond to the exact same location on the computer (i.e., no displacement). (O ^ "Touchscreen") \ Q Create floppy disks Prepare 2HD floppy disks and make sure they are not in the write-protected state, then select [Start] - [Programs] - [Panasonic) - [Create BACKUP DISK] and follow the on-screen instructions. Place a label identifying the contents on each disk. • Name of created backup disk FIRSTAID FD (When the display for creating the UPDATE DISK is shown, create the disk by following the on-screen instructions.) Store the floppy disks in a safe place. They will enable you to return your computer to close to the condition at the time of purchase should any problems occur. When creating floppy disks, do not run any other application program. When creating floppy disks and the message [Insufficient files to copy] is displayed, click [OK] and then contact Panasonic Technical Support. While the MP indicator ((mp|) is on, do not remove the floppy disk, power down your computer or use the suspend or hibernation function (q= "Sus- pend/Hibernation Functions"). 10 Install Acrobat® Reader 4.0 /note)——- tWindowslNTi Acrobat® Reader is necessary to view the Reference Manual, which explains detailed operational procedures concerning your computer. s_S CD In [Start] - [Run], input (c:\util\readerVAr40eng.exe], then press [OK], (2) Press |Next] and set up the Acrobat® Reader 4.0. (3) After reading the "Software License Agreement”, select [Accept ) if you agree to the terms. (4) Press [Next]. © At the [Setup Complete), select [Yes, I want to restart my computer now], then select [Finish]. 13 Getting Started Getting Started First-time Operation 11 iWindowslNiTS Partition the Hard Disk The hard disk includes an NT tile system (NTFS) partition of 4GB The remaining free hard disk space can be used when necessary by creating more partitions (in [Start]-[Pro-grams]-[Administrative Tools (Common)HDisk Administrator]) The sector showing [Unknown] is an important sector and must not be deleted ( This concludes the first-time use operation guidelines. ) Xnote)- €Wincjowsi95l When using the files m the following folders available on the retail version of the Windows CD-ROM, it is necessary to run a separate file decompression program \admm \help \datalink \other \d rivers To uncompress the file, it is necessary to have approximately 75 MB of free disk space available on the hard disk To use the CD-ROM drive or DVD-ROM dnve in MS-DOS mode perform the operation below after modifying config sys and autoexec bat ( C? "Using a Multimedia Pocket Device") File decompression method (T) Turn your computer on (D When [Starting Windows 95] is displayed, press CUD (3) Select [Command prompt only] (4) Insert the Product Recovery CD-ROM (5) At the prompt, input the following L \en\addfile C Enter) Follow the message on the screen (If the computer enteis the ECO mode while copying, press CCtrD ) After this program is executed, the contents of the above folders will be decompressed to the c \util\win95add folder Xnote)- ÄWindöwsiNif#. The library able to be used with the retail version of Windows NT 4 0 for Service Pack 6A is in the following folder on the hard disk drive c \winnt\i386\drvlib 14 Starting Up/Shutting Down Starting Up Power Switch У Open the display (страде 9) Turn your computer on Slide the power switch toward the rear of the computer and hold it for approximately one second until the power indicator turns on before releasing it. 4 The computer will not power on when the display is closed (except when connecting an external display). After confirming that the power indicator has turned on, avoid the following until Windows has completed loading. • Touching the power switch. • Performing any keyboard, touch pad, touchscreen (or external mouse) operations. • Closing the display. If the display is closed while Windows is starting up. it is possible that color, etc., will not be displayed properly. Run the [ MS-DOS Prompt] ([Start] - [Programs] - [MS-DOS Prompt]), and use full screen display mode by pressing CSD +( Enter ). After returning from the full screen mode...