Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
En_Port CB2455.book Page 3 Thursday, March 31, 2005 1:50 PM
Using Your Headset
Usage
Action
Turning on
Press and hold the Multi-function button for three seconds. The LED turns
headset
blue.
Turning off
Press and hold the Multi-function button until the LED turns red.
headset
Make sure that your headset is turned on (it may be in standby mode when
Making a call
inactive), dial the number, and then proceed with your call.
If there is an incoming call, your earpiece and mobile phone rings, and your
Answering a call
headset beeps. Press the Multi-function button.
Press the Multi-function button to end a call. You can also end a call using
Ending a call
your mobile phone.
Press the Multi-function button and when you hear a beep, say the voice
Using Voice Dial* tag.
Using Last
Press the Multi-function button twice within one second.
Number Redial*
Press the Volume Increase or Volume Decrease button to gradually
Adjusting volume increase or decrease the volume.
Rejecting a call
Press and hold the Multi-function button for three seconds.
Putting a call on
Press and hold the Volume Increase and Volume Decrease buttons
hold
simultaneously, for one second.
Switching between Press the Volume Increase and Volume Decrease buttons
calls
simultaneously.
Muting or
Press and hold one of the Volume buttons until the LED alternately blinks
unmuting the
red and blue.
microphone
To unmute the microphone, press one of the Volume buttons.
Make sure that your headset is turned off. Press and hold both Volume
buttons simultaneously for 20 seconds. The LED alternately blinks red and
Clearing all
blue. Press and hold both Volume buttons for two seconds. You hear two
headset pairings
beeps and your headset turns itself off automatically. Charge your headset for
a few seconds to reset your headset. All current pairings are cleared.
*Some features are available only for certain mobile phones. Refer to your mobile phone’s documentation.
3
...