Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 908.76 kb Dateiname: Unterrichtssprache:

This system implements the latest FM wireless technology, which offers you complete freedom of movement while enjoying your favourite movie or music. With energizing docking station, your headphone can be recharged in ease while it is not in use. This allows your headphone to be fully charged and always be ready for use whenever you need to enjoy a movie. To ensure you achieve the best performance from your FM wireless headphone system, please read this manual carefully and keep it for future reference. Functional overview - Product illustrations on inside flap A) Transmitter 1 Power on/off indicator 2 Charging indicator 3 3.5 mm stereo input jack 4 Channel switch 5 DC power input jack B) Receiver 6 Manual tuning switch 7 Volume control 8 Power on/off button 9 Power on/off indicator/ low battery indicator Important information Important information Please read the following instructions carefully, and retain this booklet for future reference. All the safety and operating instructions should be read before using the FM wireless headphone system. Safety precautions • Prevent fire or shock hazard: do not expose this equipment to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. • Radio equipment for wireless audio applications is not protected against disturbance from other radio services. • Do not use cleansing agents containing alcohol, spirits, ammonia or abrasives as they may harm the housing. Use a slightly dampened chamois cloth to clean the housing. • If fluid spills into the headphone system, remove the batteries immediately and consult an authorized dealer. • Do not use this product in damp places or close to water. • Do not expose this product to extreme heat or direct sunlight. • Do not disassemble the product. In the event of technical difficulties, take it to your Philips retailer. • Do not cover this product • Inadequately protected or sensitive electronic equipment may be affected by the use of this product. This interference may lead to damage to either equipment. Please check whether or not surrounding equipment may be affected by this product before you start using it. • Hearing Safety! Continuous use at high volume may permanently damage your hearing. System compatibility It is technically possible to use an additional number of FM wireless headphones or Philips FM wireless speakers with a single transmitter if they all*: – operate in the 864 MHz band – work according to the same modulation scheme – can detect a 19kHz pilot tone Please consult the appliance’s electrical specification sheets for confirmation on compatibility. This statement is to be interpreted from a technical point of view only and does therefore not constitute any guarantee nor obligation whatsoever regarding the commercial availability of single FM wireless headphones /speakers compatible with SHC8525. IMPORTANT! • The energizing docking station does not transmit audio signal when charging is activated. WARNING! • Before using the FM headphone for the first time, please ensure that the batteries are fully charged for at least 16 hours. This will guarantee a longer operating lifetime of batteries. • This product complies with the latest safety regulations. Please only charge the batteries with the docking station provided (SHC8525) or with fully compatible charger. Audio Connection 9 Connect one end of the audio cable (3.5 mm stereo plug) to the transmitter’s 3.5 mm STEREO INPUT JACK. 10 Connect the other end of the 3.5 mm stereo cable to either: a) The headphone output of an audio source, such as TV, HiFi or PC. Adjust the volume level of the audio source to a fixed reasonably high level; for example 25% of the maximum level. • In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3mm stereo adapter plug. IMPORTANT! • In case of certain TVs, the headphone jack output level can only be adjusted after accessing the TV on-screen menu. b) The line output of an audio source, such as REC OUT or LINE OUT (with the Y-cable supplied). • Check if the red RCA plug (right channel) is connected to the right channel (red) of the audio source. • Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source. • In case the audio source has an adjustable RCA output level, adjust the output level to the highest acceptable undistorted level. 11 Switch on your audio source and carefully increase the volume of the audio source. The POWER ON/OFF INDICATOR of the transmitter lights up when signals are received. 12 Switch on the POWER ON/OFF button of the headphone. The POWER ON/OFF INDICATOR will be switched on automatically. 13 To tune the headphone to the correct transmission frequency, choose 1 of the 3 provided frequency options (the selected transmission frequency of the transmitter). The headphone will quickly tune to the transmitter. 14 In case interference from neighbouring transmitters has occured, adjust the transmission channel...

Herunterladen

Geben Sie zwei Ziffern: