Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Alpine Dateigröße: 4.53 mb Dateiname: EX-10_INSTALLATION_GUIDE.pdf Unterrichtssprache:

eX.10’s AUX output can connect directly to this input. If the vehicle is so equipped, Option #1 will provide the best sound quality. OR Option #2: Use the KWE.155B antenna splitter. Alpine offers an optional KWE.155B FM antenna splitter to allow the eX.10 to be wired directly into the vehicle’s factory radio antenna. This option provides much better sound quality than using the eX.10’s built.in FM transmitter. Here’s what’s included with the eX.10: Display unit Power supply Display cable iPod cable Remote control Antenna Cigarette Lighter Adapter Power Cable Bluetooth microphone Accessory kit (remote control battery, microphone clip, cable clips, etc. Display mount Page 2 Installation Instructions Step 1: Input into the factory radio Option #1: Use the factory AUX input. Purchase a 1/8” phono.to.phono jack cable to connect the eX.10 to the factory AUX input. Part # 42.2607 from Radio Shack is a good example. Plug one end of the cable into the vehicle’s factory AUX port. Plug the other end of the 1/8” phono cable into The “aux out” port on the eX.10’s power supply. Select “AUX” as a source to hear iPod or Bluetooth output from the vehicle’s sound system. Skip to Page 5 to continue the installation>>> Page 3 Installation Instructions Step 1: Input into the factory radio Option #2: Use the Alpine KWE-155B FM splitter. Purchase the Alpine KWE.155B FM splitter. Remove the vehicle’s factory radio, and unplug the antenna connection. Plug the factory antenna connector into the port marked “car antenna” on the KWE.155B FM splitter. Plug the antenna lead marked “car audio” into the factory radio’s antenna input. Route the lead marked “eX.10” to the desired location for the eX.10’s power supply, and re.install the factory radio. Page 4 Installation Instructions Step 2: Mount the Bluetooth microphone Attach the Bluetooth microphone to the microphone mounting clip by pushing the microphone onto the clip as shown Clip the microphone mount to a spot in the car no more than 24” from the customer’s mouth. Good locations include the sun visor, the top of the A.pillar, and the edge of the roof.mounted center console (if equipped)* . Route the microphone cable to the desired location for the eX.10’s power supply. *Note: Do not install the microphone in any position where it could interfere with the functionality of airbags in the vehicle. Page 5 Installation Instructions Step 3: Mount the eX.10’s display Twist the supplied round plastic plate to the base of the eX.10’s display, and attach the supplied double.sided tape to this plate. Clean the dash area where the eX.10’s display will be mounted with the supplied alcohol pad. Remove the backing from the double.sided tape, and attach it to the dash by pressing firmly*. Connect the monitor cable to the display base, and route the monitor cable to the desired location for the eX.10’s power supply using the supplied cable clamps *Note: There are many custom.mounting options for the eX.10’s display; refer to the Alpine De...

Herunterladen

Geben Sie zwei Ziffern: