Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Make sure the S1 is off. You can tell whether the S1 is on or off by looking at the Bluetooth Light on the front. If the light is on or flashing, then the S1 is on: turn it Bluetooth Light off by holding down (the Multi-Function Button) for about 5 seconds. The S1 will beep and the light will turn red and then go out. 2. With the S1 off, hold down (the MFB) for about 5 seconds, until the Bluetooth Light starts flashing red and blue. The S1 is now in pairing mode. 3. Go to the Bluetooth menu on your phone. Turn on Bluetooth and perform a search for Bluetooth devices (see the section on pairing in your phone’s manual for help with this). 4. When the phone displays a list of devices, select the BLUEANT S1, enter the code 0000 when prompted, and accept any connection requests. When the S1 has connected to your phone, the Bluetooth Light will flash blue every few seconds. You only need to pair each phone once: the S1 will automatically reconnect in future. On some phones you need to set the S1 as a “trusted connection” in the options menu to enable automatic reconnection: see your phone’s manual for more details. Installing the S1 in your Car 1 Attach the clip to the slots on the back of the S1 and slide it so that it locks into place. 2 You can attach the clip 2 different ways, depending on how you want to position the S1 on your car’s visor. Slide the clip and the S1 onto your car sun visor. Make sure that the microphone is directed towards you. 3 Microphone When the Phone Rings 1 OR Say ACCEPT CALL, ACCEPT, ANSWER or OK: Answer 2 Use the buttons: >Click to accept the call. >Click to reject the call. You can only answer calls with your voice if you’ve turned on the voice answer feature. To turn voice answer on or off, the S1 must be in “Standby” mode (no ongoing call or music streaming). >To turn voice answer on, hold down VOL + for about 5 seconds (until the S1 beeps). >To turn voice answer off, hold down VOL - for about 5 seconds (until the S1 beeps). If the voice answer feature is on, the S1 plays an extra beep when the phone rings. To use voice answer you must say the words clearly and slowly. NOTE Making Calls To make a call, do any of the following: >Dial a number on your phone: the audio will automatically transfer to the S1. >To redial the last number you called, hold down (the MFB) for about 3 seconds (this function is only available if your phone supports the handsfree Bluetooth profile). >If your phone supports voice dialing, then you can use it to make calls. Hold down (the MFB) for about 1 second to activate your phone’s voice dialing feature. You may need to record voice tags on your phone to use this feature: see your phone’s manual for more details. >To end a call, click (the End/Reject button). Transferring Audio Back to your Phone You can transfer audio from the S1 back to your phone by holding down (the MFB) for about 3 seconds. Hold down (the MFB) for about 1 second to transfer audio back to the S1 (although please note that not all phones support this feature). Charging Your S1 has an initial charge to get started. In future you must charge it for up to 3 hours. Connect the supplied charger to the S1 and plug it in to an external power sou...