Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Ryobi Dateigröße: 4.99 mb Dateiname: Unterrichtssprache:

Repair or replace a damaged or worn cord immediately. This product is for use on a nominal 120 V circuit and has a grounding plug similar to the plug illustrated in figure 1. Only connect the product to an outlet having the same configuration as the plug. Do not use an adapter with this product. See Figure 1, page 16. A WARNING: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury. A WARNING: Check extension cords before each use. If damaged replace immediately. Never use the product with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury. 8 - English GLOSSARY OF TERMS Air Filter Porous element contained within a metal or plastic housing attached to the compressor cylinder head which removes impurities from the intake air of the compressor. Air Tank Spherical component which contains the compressed air. Amperage Overload Switch (Manual) Automatically shuts off the compressor if the amperage of the electric motor exceeds a predetermined limit. Check Valve Device that prevents compressed air from flowing back from the air tank to the compressor pump. Cut-In Pressure The low pressure at which the motor will automatically restart. Cut-Off Pressure The high pressure at which the motor will automatically shut off. Electric Motor Device which provides the rotational force necessary to operate the compressor pump. NPT (National Pipe Thread) A seal thread tape must be used to provide a leak-free seal on pipe threaded connections. Pressure Regulator Knob Regulates the outgoing pressure from the air outlet to the tool. It is possible to increase or decrease the pressure at the outlet by adjusting this control knob. Pressure Switch Automatically controls the on/off cycling of the compressor. It stops the compressor when the cut-off pressure in the tank is reached and starts the compressor when the air pressure drops below the cut-in pressure. PSI (Pounds Per Square Inch) Measurement of the pressure exerted by the force of the air. The actual psi is measured by a pressure gauge on the compressor. Pump Produces the compressed air with a reciprocating piston contained within the cylinder. Regulator Pressure Gauge Displays the current line pressure. Line pressure is adjusted by rotating the pressure regulator knob. Safety Valve Prevents air pressure in the air tank from rising over a predetermined limit. SCFM (Standard Cubic Feet Per Minute) or CFM (Cubic Feet Per Minute) A unit of measure of air delivery. Tank Pressure Gauge Indicates the pressure in the air tank. FEATURES product specifications Air Tank Capacity....................................................3.0 gal. Air Delivery...........................................2.0 SCFM @ 90 psi Air Pressure....................................................135 psi max. Input................................120 V, AC only, 60 Hz, 9.0 Amps KNOW YOUR AIR COMPRESSOR See Figure 2, page 16. The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. ACCESSORY STORAGE The air compressor features a storage space for pneumatic accessories. Tank Pressure Gauge.................................1.5 in. diameter Regulatory Pressure Gauge..........................2 in. diameter Net Weight................................................................32 lbs. CARRY HANDLE The air compressor has a carry handle for easy transport. CORD WRAP The cord wrap keeps the cord neatly out of the way for storage. DRAIN VALVE The drain valve on the tank is for draining condensation to help prevent tank corrosion. 9 - English FEATURES FOLDING HANDLE AND HAND GRIPS The air compressor is equipped with conveniently placed hand grips for lifting and a folding handle that can be adjusted for storage and transportation. HEAVY-DUTY PLASTIC HOUSING The sturdy plastic housing frames the air compressor to help protect the gauges and controls from damage due to impact. INTEGRATED COIL HOSE RETAINER WITH 25-FT. AIR HOSE This tool is equipped with an integrated coil hose retainer feature that will hold up to 25 feet of coiled 1/4-in. air hose. A 25-ft. coiled hose is included with your air compressor. OIL-FREE PUMP The oil-free pump reduces the need for maintenance. PRESSURE REGULATOR KNOB Use the pressure regulator knob to adjust the amount of air being delivered through the hose. Pressing down on the knob will lock it into place. This prevents movement of the knob caused by vibration during use. QUICK COUPLER The air compressor has a 1/4-in. quick connect coupler located on the side of the unit. REGULA...

Herunterladen

Geben Sie zwei Ziffern: