|
Anleitung Zusammenfassung
The impellers and diffusers are constructed from a rugged thermoplastic and are extremely resistant to mineral and algae deposits. Field replacement of the pump end is easily accomplished without the use of specialized tools. The SC series pumps can be installed below the water level in a well, lake, river or cistern. They can be used to fill open tanks or used to pressurize water systems with heads up to 550 feet (167 meters). They are designed for use in stand alone water delivery systems. They are pollution-free, corrosion-resistant, permanently lubricated and quiet.There is no better way to provide water for livestock,remote homes, campsites, small farms or any other need beyond the commercial power grid. Part Model Optimal Flow Optimal Head Power Diameter Total Length Total Weight Pump Outlet Number Number GPM (LPM) Feet (Meters) (Watts) in (cm) in (cm) lbs (kg) Connection Size 85750 SC 500 15-60 3.70 (14) 203.4 (62) 500 3.75 (9.53) 26.4 (67.1) 26.0 (11.8) 1-1/4” NPT 85751 SC 500 25-40 6.08 (23) 137.8 (42) 500 3.75 (9.53) 25.2 (64.0) 25.0 (11.4) 1-1/4” NPT 85752 SC 500 35-35 9.25 (35) 108.3 (33) 500 3.75 (9.53) 22.9 (58.2) 25.0 (11.4) 1-1/4” NPT 85753 SC 500 40-25 11.1 (42) 88.6 (27) 500 3.75 (9.53) 21.5 (54.6) 24.0 (10.9) 1-1/4” NPT 85754 SC 1000 15-105 4.49 (17) 374.0 (114) 1000 3.75 (9.53) 33.4 (84.7) 33.0 (14.8) 1-1/4” NPT 85755 SC 1000 25-85 6.34 (24) 315.0 (96) 1000 3.75 (9.53) 31.7 (80.4) 32.0 (14.3) 1-1/4” NPT 85756 SC 1000 35-70 8.98 (34) 236.2 (72) 1000 3.75 (9.53) 27.8 (70.5) 31.0 (13.9) 1-1/4” NPT 85757 SC 1000 45-60 11.62 (44) 193.6 (59) 1000 3.75 (9.53) 26.4 (70.0) 29.0 (13.0) 1-1/4” NPT 85758 SC 1000 60-45 16.11 (61) 147.6 (45) 1000 3.75 (9.53) 26.4 (70.0) 29.0 (13.0) 1-1/4” NPT 85759 SC 1000 105-30 22.45 (106) 98.4 (30) 1000 3.75 (9.53) 27.6 (70.1) 31.0 (13.9) 2” NPT Solar Water Pumping Products Catalog CC 2000 Centrifugal Pump Controller CC 2000 Pump Controller For SC Series Pumps Accommodates Arrays with two to twelve 36-cell Modules in Series; Will Operate from 24 to 144 volt Battery Banks Maximum Power Point Tracking Self Programming Operation Current Boosting Self Diagnostic Simplified Control and Troubleshooting LED Indicators Provide Convenient Information about Voltages, Switch and Sensor Status and Overload Conditions The CC 2000 pump controller is designed to connect solar modules to Kyocera Solar’s SC series submersible motors and centrifugal pumps. The controller provides current boosting combined with true Maximum Power Point Tracking (MPPT) of the solar modules. The pump controller’s microprocessor constantly monitors the incoming solar power and boosts current to operate the solar modules at their peak power point and maximize pump output. The controller is entirely self-configuring and requires no setup or adjustment by the user to ensure proper operation. The CC 2000 controller will accommodate two to twelve solar modules in series. Any combination of modules can be used as long as the total Open Circuit Voltage (VOC) does not exceed 300 Volts. Strings of modules can be wired in parallel to maximize daily water production. In addition to solar modules, the controller will also operate from 24 to 144 Volt battery banks for use in a broad range of applications. The CC 2000 controller is only intended for use with Kyocera Solar’s SC series of motors. The controller’s unique design simplifies control and troubleshooting of pumping systems. Inputs are provided for remote switches and Kyocera Solar’s unique water level sensor. Indicators provide convenient information about voltages, switch and sensor status, and overload conditions. Kyocera Solar’s newly designed pump controller is user friendly. It is designed to provide maximum power under varying conditions and requires no programming by the user. We are proud to introduce the Kyocera Solar line of pump controllers and are confident you will be satisfied. Model CC 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 85224 Shipping Weight: 10.0 lbs.(4.54 kg) Description Value Maximum Ambient Temperature 50° C Minimum Ambient Temperature -20° C Maximum Solar/Input Voltage (total VOC @ -20°C) 300 Volts Max. Output Current - Current Boost Mode (input voltage greater than output voltage) 14 Amps Max. Output Power - Current Boost Mode (input voltage greater than output voltage) 2000 Watts Input Current Limiting 15 Amps High Temperature Protection (shutdown temperature at heatsink) 85° C Solar and Pump Wire Sizes 0.5 - 16 mm2 (6 - 20 AWG) Sensor and Remote Switch Wire Sizes 0.2 - 2.5 mm2 (14 - 24 AWG) Solar Water Pumping Products Catalog Kyocera Solar Modules and Interconnects / MC Connectors Kyocera Solar Modules High efficiency multicrystal modules Consistent, reliable time proven products Cell efficiency over 14% UL listed 6 inch cell modules Low iron, tempered glass,...
Dieses Handbuch ist für folgende Modelle:Pumps - 85221 (1.24 mb)
Pumps - SD 3-70 (1.24 mb)
Pumps - SD 6-35 (1.24 mb)