Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Aquacal Dateigröße: 2.64 mb Dateiname: Unterrichtssprache:

continued: 4. Selecting Pool/Spa Thermostat Settings: A. Press the [POOL/SPA] key to toggle between the pool and the spa temperature set points. B. The pool/spa LED indicator lights, located to the left of the temperature display, will confirm the selected set point. 5. Changing The Pool Temperature Set Point: A. Using the [POOL/SPA] key, select the POOL temperature set point. The pool set point indicator light will confirm the selection. B. The pool temperature set point is adjustable from a minimum of 45oF to a maximum of 104oF. Pressing the [UP ARROW] key will raise the set point 1-degree for every push of the button. Pressing the [DOWN ARROW] key will lower the set point 1-degree for every push of the button. 6. Changing The Spa Temperature Set Point: A. Using the [POOL/SPA] key, select the SPA temperature set point. The spa set point indicator light will confirm the selection. B. The spa temperature set point is adjustable from a minimum of 45oF to a maximum of 104oF. Pressing the [UP ARROW] key will raise the set point 1-degree for every push of the button. Pressing the [DOWN ARROW] key will lower the set point 1-degree for every push of the button. 7. Selecting Between oF and oC: A. Simultaneously press and hold both the [UP ARROW] and [DOWN ARROW] keys until [CF1] (Celsius / Fahrenheit) code appears. B. With the [CF1] code displayed, pressing the [UP ARROW] or [DOWN ARROW] keys will change the selection code to either “0” or “1”. Select “1” for Fahrenheit temperature display, or “0” for Celsius temperature display. Once the desired temperature display mode has been selected, not pressing any buttons for 15-seconds will allow the controller to save the selection and return to the normal operating mode. Pressing the {POOL/SPA] key will also save the selection and step to the next menu parameter: [ULC] (User Lock Code). 8. User Lock Code Option [ULC]: This Option Explained: Heat pumps are shipped from the factory with the [ULC] option disabled. Enabling the [ULC] function permits the heat pump owner to restrict access to the unit’s controls. With the [ULC] function enabled, unless the correct ULC code number is entered, changes to Level-1 programming are not possible. (I.e.: Altering temperature set points, Pool/Spa selection, C/F display changes, etc., will not be possible). The [ULC] option can be thought of as an electronic lockable cover for the controls. (Continued on Next Page) HEATER CONTROLS...continued Start Up & Setting Operating Controls Owner-Level Programming Instructions... continued: 8. User Lock Code Option [ULC]...continued: A. Selecting ULC Option: 1) Press either the UP or DOWN ARROW keys; if “LOC” is momentarily displayed followed by “0”, the ULC feature is enabled. If “0” displays proceed to “6)” of this section; otherwise, see number “2,” below. 2) Simultaneously press and hold both the [UP ARROW] and [DOWN ARROW] keys until [CF1] (Celsius / Fahrenheit) code appears. 3) Press the [POOL/SPA] key once to display [ULC]. 4) With [ULC] displayed, pressing either the Up or Down Arrow key will display either “1” or “0”. Selecting “0” will allow the keypad to remain unlocked. Selecting “1” will enable the User Lock Code option. Then, to enter a lock code number, press the [POOL/SPA] key once to display [ELC] (Enter Lock Code). 5) With [ELC] displayed, use the Up or Down arrow keys to select a lock code. The code can be any number from “00” to “99”. The factory set lock code is “0”. Not pressing any buttons for 15-seconds will allow the controller to save the selection and return to the normal operating mode. Pressing the {POOL/SPA] key will also save the selection, and will step the controller to the next menu parameter: [CFO] (Call Flex Options). 6) Once the ULC option has been enabled, pressing any key will momentarily display “LOC” followed by “0” (prompting the entry of the correct lock code number). To gain access to the controller: a. Using the [UP ARROW] key, scroll to the correct lock code number, then; b. Press the [POOL/SPA] key… Current water temperature will be displayed… Control setting can now be viewed or changed as desired. c. After a period of approximately four (4) minutes, during which time no buttons have been pressed, the controller will automatically return to the locked mode. Provided ULC selection is set to “1,” the controller will always fail-safe in the locked mode. d. Without knowledge of the correct lock code, and with the ULC enabled, control adjustments will not be possible. Be certain to record your lock code in a safe place. The lock code may be changed any number of times by following the instructions detailed in this section. B. De-Activating the User Lock Code [ULC] function: 1) Following the instructions detailed previously at: “8, 6)”, press any key and enter the user lock code number; then press the [POOL/SPA] key. 2) Immediately following the entry of the user lock code, simultaneously press and hold the [UP ARROW] and [DOWN ARROW] keys until the cod...

Herunterladen

Geben Sie zwei Ziffern: