Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Utilisation 7 3. Package contents 7 4. Technical data 8 5. Operating elements 8 6. Preparing the Mini-Compressor for use 9 7. Using the Mini-Compressor 9 7.1 Using the Mini-Compressor to inflate objects 9 7.2 Using the Mini-Compressor to measure inflation pressure 12 8. Storing the Mini-Compressor 12 9. Cleaning the Mini-Compressor 13 10. Disposal 13 11. Service 14 12. Importer 14 3 Mini-Compressor KH 4106 1. Safety instructions Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. Danger! Should water or moisture penetrate into the Mini- Compressor, … • there is the danger of receiving an electric shock! • it could be irreparably damaged! Thus: Do not use or store the Mini-Compressor … • in humid environments! • in close proximity to water! Additionally, never subject the Mini-Compressor to spraywater or rain. Also, do not place any water-filled receptacles onto the Mini-Compressor! Extreme heat effects can lead to the overheating of the Mini-Compressor and to the meltdown of plastic parts. Through this the Mini-Compressor could be irreparably damaged, and there is the additional risk of fire! 4 Thus: • Do not place the Mini-Compressor in close proximity to heat sources. • Do not place unprotected open flame sources – e.g. burning candles – on the Mini-Compressor! • Do not leave the Mini-Compressor in a vehicle if there are high outdoor temperatures. Especially in summer the temperature inside a vehicle can become extremely high. • Do not cover the ventilation openings of the Mini- Compressor! Therefore, do not place the Mini-Compressor on blankets or other textiles etc. • Take note that the Mini-Compressor is not suitable for constant operation. Thus do permit the Mini-Compressor to be switched on without a break for periods in excess of 10 minutes. Allow it to cool down for at least 30 minutes before switching it back on. • The Mini-Compressor should not be used or stored in dusty environments. Dust could penetrate into the Mini-Compressor. Should large amounts of dust penetrate into the Mini-Compressor it could overheat and be irreparably damaged. There is also a danger of fire! Never attempt to repair the power cable yourself in the case of a defect! There is the danger of an electric shock! Instead, approach one of our service partners. 5 Always check the maximum permitted air pressure for the object to be inflated! For this, consult the operating instructions and safety information supplied with the object to be inflated. Additionally, when inflating objects with the Mini-Compressor always take note of the mamometer on the Mini-Compressor. Should the object be inflated beyond the maximum permitted air pressure it could burst. There is then the danger of serious physical injury! Also, take precautions that the Mini-Compressor cannot be used by children without supervision! Caution! The Mini-Compressor could be irreparably damaged if it falls or is dropped! Therefore always place the Mini- Compressor on a stable, level and non-slip surface. • NOTE: For damages resulting from … • Opening the housing of the Mini-Compressor • attempted repairs made by non-qualified personnel • improper utilisation of the Mini-Compressor no liability or warranty will be accepted! The Mini-Compressor becomes warm when it is switched on. This is not a cause for concern and is not an indication of a technical problem. 6 2. Utilisation The Mini-Compressor is suitable exclusively for… • the inflation of objects with a valve (e. g. tyres, air mattresses, balls etc.). • measuring the air pressure of inflated objects. • for operation on the 12-V circuit of vehicles via the cigar lighter. • for domestic, non-commercial use. 3. Package contents • Mini-Compressor • 3 Adapter sets for various valve types • Operating manual • NOTE: The connector valve of the Mini-Compressor is suitable for the inflation of tyres with Schrader valves. For this you do not need to use an additional valve adapter. For the inflation of bicycle tyres with valve types … • Sclaverand (also: French valves, Presta valves, inner-tube valves, racing valves) • Dunlop (also: Blitz valves, German valves) you require the valve adapter for Schrader car valves. These are available from specialist bicycle shops. 7 4. Technical data Operating voltage : Current consumption: Max. operating pressure: Continuous operating time: 12 V DC 6,5 A 17 bar /250 Psi 10 Minutes 5. Operating elements Mini-Compressor Manometer display … • bar resp. kg/cm2 (inner, yellow scale) • psi (outer, white scale) Airline Connection valve with fastening lever Power cable Turn switch (Mini-Compressor on/off) Cigar lighter plug Adaptor sets for various valve types. 8 6. Preparing the Mini-Compressor for use Remove the Mini-Compressor and the Adapter sets from the packaging. Unwind the power cable to its full length. The Mini-Compressor...