Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
•Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year (except where noted on our price schedule) from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The distributor should direct the original user to return the product (with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem. Failures caused by accident, alteration, or misuse are not covered by this warranty. •Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners. •This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you. All claims must be sent to: Astro Pneumatic Tool Company 372 Old US Highway 52 South Mt. Airy, NC 27030 1 YEAR LIMITED WARRANTY PR14 AIR RIVETER - 3/32", 1/8", 5/32", 3/16" AND 1/4" CAPACITY Page 1 PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING 1-800-221-9705 FOR INSTRUCTIONS AIR RIVETER - 3/32", 1/8", 5/32", 3/16" AND 1/4" CAPACITY • Includes the following nosepieces: 1/4" (6.4mm), 3/16" (4.8mm), 5/32" (4mm), 1/8" (3.2mm), 3/32" (2.4mm) • Performs well at any angle • Gets into hard-to-reach areas • The ." Nose piece is located on the end of the outer cylinder (PR14-02). The 3/16", 5/32", 1/8" are threaded into the bottom Air Cylinder lid (PR14-24).The 3/32” will be found inside a plastic bag with other related parts. • Provides quick, quiet and comfortable operation preventing user fatigue Rivet Capacity: 1/4" Overall Length: 10-7/8" (280mm) Net Weight: 3-1/2lbs. (1.6kg) Stroke: 15mm Motor: 1/2hp Air Inlet Thread NPT: 1/4" Air Hose I.D. Size: 3/8" (10mm) Avg. Air Consumption: 2.320 Liter/Stroke Air Pressure: 90-120psi SPECIFICATIONS: Page 2 PR14 AIR RIVETER - 3/32", 1/8", 5/32", 3/16" AND 1/4" CAPACITY GENERAL OPERATION After unpacking the air powered rivet gun, make sure all of the parts listed are supplied. In addition to parts supplied are two wrenches you will need for replacement of various parts on the PR14. Keep the packages containing wrenches, one 3/32 rivet nosepiece, one set of jaws and the bottle in a safe place. Install the plastic rivet catcher (bottle) (#PR14-15) and add the . NPT air nipple to the air inlet side located near the base. Add a few drops of air tool oil or #10 Spindle oil to the air inlet near the base of the air riveter also add a drop or two of oil to the Nose Piece Jaws (#PR14-4) through the end of the Nose Piece (#PR14-1). Next squeeze the operating handle Trigger (#PR14-25) several times before inserting a rivet. • Power tools cannot be used in potentially explosive atmospheres unless especially designed for that purpose. • Unexpected tool movement or breakage of inserted tool may cause bodily injury. • Power tools should be disconnected from their energy source changing or servicing any parts. • Never put any body part, clothing hair etc. between the tool and the work area as serious bodily injury can result. • Guard against the risk of being injured by whipping air hoses. • Guard against unexpected tool movement or breakage of the rivet may cause injury. • Unstable postures may not allow counteracting of normal or unexpected movement of the air tool. AIR SUPPLY Adjust your air compressor air pressure to 90-120psi, (6.21-8.28 Bars). NOTE: If you use extra long air hoses more than 50 feet long you may have to increase the air pressure to compensate for reduced air operating pressure. Always use clean, dry air that has been filtered and is free of dust, corrosives fumes or moisture. You should drain the air tank daily and clean the filtering system as needed. To use more air pressure will shorten that air tools life and may lead to premature failure of this Air Riveter Gun and could cause injury. Use the standard air supply information located in the above diagram. The oil and water extractor should not be mounted on or near the air compressor. The temperature of air is greatly increased during compression. As the air cools down to room temperature, in the air line, on its way to the Air Power Tool, the moisture contained in it condenses. Thus, for maximum effectiveness, the oil and water extractor should be mounted at some point in the air supply system where the temperature of the compressed air ...