Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Actual time may vary. Times are based on the internal battery being fully charged. The DC accessory outlet has a 15-amp automatic overload protection circuit breaker. If an overload occurs, unplug (remove) accessory, and the breaker will automatically reset. using usb port9. Note: The Jump Start + USB On/Off switch energizes both the jump starting clamps and the USB port. Do not allow the clamps to touch each other or the same piece of metal when the switch is “On” (turned to the right). Confirm that both jump starting clamps are stored on the storage holders, 9.1 or that the Quick Connectors are disconnected. Turn the Jump Start + USB switch to “On” position.9.2 The USB plug is now live; plug in the accessory.9.3 using the air compressor10. PRECAUTION – Read instructions of the product being inflated before using the compressor. Avoid over inflation, do not exceed the manufacturers recommended pressures. Do not leave the compressor unattended during use. The 12 volt compressor is rated for 150 PSI pressure. The hose is stored on the back of your Instant Power™. The On / Off switch for the compressor is located on the back of the Instant Power™. Attach the air compressor hose to the product or accessory to be inflated 10.1 by flipping down the lever. Push the air compressor switch to the ON position and inflate product.10.2 When the product is inflated to the proper air pressure, push the compres10.3 sor switch to the OFF position and remove the hose. Do not run compressor for more than 10 minutes maximum at a time. Al10.4 low the compressor to cool down for 10 minutes before using again. NOTE: If the compressor overheats, the built-in thermal protection will turn the unit off. Wait a few minutes and it will automatically restart. Estimated Time for Inflating Vehicle 13” to 16” 3 to 16 Minutes Bike Tire 30 to 40 Seconds Balls 5 to 30 Seconds Use an air compressor gauge to ensure the proper pressure has been reached. Do not over inflate. using light11. Flip the Light Switch, located on the front of the IP-180KE, to the ON posi11.1 tion. NOTE: The LED lights are not replaceable. storage12. important: charge immediately after purchase • keep fully charged. • Charge the Instant Power™ internal battery before first use and after every use thereafter. All batteries are affected by temperature. The ideal storage temperature is at 70 degrees Fahrenheit. The internal battery will gradually self-discharge (lose power) over time, especially in warm environments. Leaving the battery in a discharged state may result in permanent battery damage. To ensure satisfactory performance and avoid permanent damage, charge the internal battery every month. The Instant Power™ can be stored in any position. When the Instant Power™ is ON, the clamps are live and will produce arcing or sparking if they come in contact with each other. To prevent accidental arcing, always keep the clamps on the storage holders and the JUMP START ON/OFF switch in the OFF position when not using it to jump start a vehicle. limited warranty13. Schumacher Electric Corporation warrants your unit to be free from defects in material and workmanship, excepting abuse or misuse, for a period of one year from the date of sale to the original user or consumer purchaser. If your unit fails or malfunctions within the first 30 days of the warranty, we will replace it with a new unit. If your unit malfunctions or fails within the 12 month warranty period because of a defect in material or workmanship, we will repair without charge. The internal battery, excluding units with swollen batteries or melted battery terminals, carries a 90-day warranty from the date of purchase. Proof of purchase required. All battery replacements will be at the sole discretion of the manufacturer or his designated agents. This warranty is in lieu of all other express warranties. The duration of any implied warranty, including but not limited to any implied warranty of merchantability or fitness for a particular purpose, made in respect to your unit is limited to the period of the express warranty set forth above. For warranty service, return your product, with proof of purchase, to the factory or a designated agent: Schumacher Electric Corporation Warranty Service Department, 1025 E. Thompson Street, PO Box 280, Hoopeston, IL 60942. Phone 1-800-621-5485, Customer Service hours: 7 AM to 4:30 PM CST. You will be responsible for all insurance and freight or other transportation charges to the factory or point of repair. We will return your unit freight prepaid if repair is covered under warranty. Your unit should be properly packed to avoid damage in transit, since we will not be responsible for any such damage. In no event shall Schumacher Electric Corporation be liable for consequential or incidental damages. Some states do not allow limitations on the length of the implied warranty or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions...
Dieses Handbuch ist für folgende Modelle:Pumps - IP-180KE (758.68 kb)