Login:
Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Grizzly, modell H4517/H4518

Hersteller: Grizzly
Dateigröße: 1 mb
Dateiname: 99a824e7-4942-39a4-ad22-fc7a0127f71c.pdf

Unterrichtssprache:en

Das Dokument wird geladen, bitte warten
Das Dokument wird geladen, bitte warten

Anleitung Zusammenfassung


PRINTED IN CHINA ONLINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED. THE MACHINE CONFIGURATION CAN CHANGE AS PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES. PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE. WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices. This symbol is used to alert the user to useful infor-NOTICE mation about proper operation of the equipment. Safety Instructions For Pneumatic Tools 1. KEEP ALL SAFETY DEVICES IN 5. KEEP CHILDREN AND VISITORS 2. PLACE and in working order. REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of AWAY. All children and visitors should be kept at a safe distance from work area. 3. checking to see that keys and adjusting wrenches are removed from tool before operation. KEEP WORK AREA CLEAN. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing air hoses from tools. Cluttered areas and benches invite 7. DO NOT FORCE TOOL. It will do accidents. the job better and safer at the rate 4. DO NOT USE IN DANGEROUS for which it was designed. ENVIRONMENT. DO NOT use 8. USE THE RIGHT TOOL. DO NOT pneumatic tools in damp or wet locations, or where any flammable force tool or attachment to do a job for which it was not designed. or noxious fumes may exist. Keep 9. DO NOT USE UNDER THE INFLU- work area well lighted. ENCE OF DRUGS OR ALCOHOL. Model H4517/H4518 Air Compressors -1 Safety Instructions For Pneumatic Tools 10. USE PROPER AIR HOSE for the 19. USE THE RECOMMENDED tool. Make sure your air hose is in ACCESSORIES. Consult the good condition and is long enough to owner’s manual for recommended reach your work without stretching. accessories. The use of improper 11. WEAR PROPER APPAREL. DO accessories may cause risk of NOT wear loose clothing, gloves, injury. neckties, rings, bracelets, or other 20. CHECK DAMAGED PARTS. jewelry which may get caught in Before further use of the tool, a moving parts. Non-slip footwear is guard or other part that is damaged recommended. Wear a protective should be carefully checked to hair covering to contain long hair. determine that it will operate prop 12. ALWAYS USE SAFETY GLASSES. erly and perform its intended func- Also use a face or dust mask if cut-tion. Check for alignment of moving ting operation is dusty. Everyday parts, binding of moving parts, eyeglasses only have impact resis-breakage of parts, mounting, and tant lenses, they are NOT safety any other conditions that may affect glasses. its operation. A guard or other part that is damaged should be properly 13. WEAR APPROVED HEARING repaired or replaced. PROTECTION. 21. NEVER LEAVE UNATTENDED 14. NEVER USE PLASTIC (PVC) PIPE TOOL CONNECTED TO AIR. FOR COMPRESSED AIR. Serious Disconnect the air hose and DO injury could result. NOT leave tool until it is relieved of 16. MAINTAIN TOOLS WITH CARE. any built up pressure. Keep tools lubricated and clean for 22. NEVER ALLOW UNTRAINED best and safest performance. Follow USERS TO USE THIS TOOL instructions for lubricating and WHILE UNSUPERVISED. changing accessories. 23. IF YOU ARE UNSURE OF THE 17. REDUCE THE RISK OF UNINTENINTENDED OPERATION, STOP TIONAL STARTING. DO NOT carry USING THE TOOL. Seek formal tool with hand on trigger and always training or research books or maga disconnect from air w...

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien