Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Vour machine is designed for long life, dependability, and the top performance you demand. Please take time now to read through this manual so you can better understand the machine's operation, maintenance and safety precautions. Everyone who operates this water pump must read and understand this manual. The time you take now will prolong your water pump's life and prepare you for its safe operation. Enjoy the exceptional performance of your Mustang Semi Trash Series water pump. THIS PUMP CAN PASS UP TO 1/3" SOLIDS DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. 2. Any person operating this pump and it's power unit should be fully aware of it's safe operation before they start using it. 3. Never use these pumps for pumping flammable liquids such as diesel or gasoline. 4. Never operate an engine driven unit in an explosive atmosphere, near combustible materials, or where insufficient ventilation exist unless specific provisions have been made regarding the power unit so as to prevent possible injury and damage. Be certain the power unit is safe for the area in which it is to be operated. 5. Always be sure the unit is on a secure footing. Keep the immediate pump area free of all unauthorized personnel. If the pump is sitting beside a pit, be sure it is well anchored so that it does not fall in. 6. Never operate the unit with any guards removed. 7. Do not over tighten the drain or filler plugs. Excessive force may damage the threads or the pump body. 8. With engine driven pumps: A) Observe all safety precautions for the handling of fuel. B) Never refuel the engine while running. C) Never refuel a hot engine. D) Run engine only in well ventilated areas. 9. Before working on this pump make sure the power unit cannot inadvertently be started. 10. Be sure the power unit, pump, wiring and piping installations are suitable for the liquids being pumped and comply with all applicable codes and regulations. 11. Use at least 12" (300 MM.) of flexible hose to make plumbing connections to the pump body. Rigid piping may put stresses on the pump, causing damage. If rigid piping must be used, properly support it so as to eliminate stresses on the pump. 12. Do not run the pump dry. Always fill the pump body with water before starting. It is not necessary to drain the pump body after each use, unless there is danger of freezing, settling of solids, or crystallization. 13. Do not subject pump to extreme conditions of acidity or basicity. Consult factory for specific recommendations concerning chemicals and temperatures. 14. Only use origin...
Dieses Handbuch ist für folgende Modelle:Pumps - 109170 (1006.45 kb)
Pumps - 109180 (1006.45 kb)