Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
When set to “OFF,” the song is played at the tempo selected at the time. 3. Release [SHIFT]. * You can check the initial tempo settings in Song Play mode. Hold down [SHIFT] and press [VOICE] (INIT TEMPO). The initial tempo settings are displayed while [SHIFT] is held down. Chapter 4 Recording and Editing Songs (Song Edit Mode) <3A> Do Realtime Recording Here, select the pattern and then record it as it is being performed. * When recording over a song that has already been recorded, the newly recorded data overwrites the previously recorded data, which is discarded. 1. With the performance stopped, select the first pattern to be recorded. Turn the TEMPO/VALUE dial to select the pattern number. * You can also select the pattern by inputting the pattern number with the numeric keys and pressing [ ]. When you want to begin the recording with the performance of a fill pattern, press [FILL] after selecting the pattern. 2. Hold down [REC] and press [START] to start recording. The first selected pattern simultaneously starts to play. The tempo indicator flashes on each beat. * When a fill pattern is selected, the fill pattern is played until the end, and then the performance returns to the basic pattern. * The same pattern continues to be recorded until the next pattern is selected. 3. Select the next pattern to be recorded. Turn the TEMPO/VALUE dial to select the pattern number. * You can also select the pattern by inputting the pattern number with the numeric keys and pressing [ ]. You can record fill patterns by pressing [FILL] during recording. The fill pattern is played until the end, and then the performance returns to the basic pattern. In addition, by pressing [FILL] while the final beat of a pattern is being played, you can have the fill pattern recorded from the beginning of the next pattern. * Although the fill pattern is played when [FILL] is pressed at the time of recording, the fill pattern is played at the beginning of the pattern during playback. 4. Repeat Step 3 as needed to record one song’s worth of patterns. * When Pattern 250 is reached, the message “PTN FULL” appears, and recording is ended automatically. 5. Press [STOP/CONT] to stop the recording. * If recording is stopped in a pattern's second measure, the measure number is reduced by one after such stoppage, and that number then becomes the number of the starting measure for the pattern. Chapter 4 Recording Using a Foot Switch With a foot switch connected, you can then use the foot switch to carry out the [START], [STOP/CONT], and [FILL] operations. For more information on setting the functions used with the foot switch, refer to “Assigning Functions to the Foot Switches” (p. 77). 65 Chapter 4 Recording and Editing Songs (Song Edit Mode) Using the DPP Function in Realtime Recording 1. Press [DPP]; “DPP” appears in the display. 2. With the song stopped, press the key pad to which the first pattern to be recorded is assigned. 3. Hold down [REC] and press [START] to start recording. The first selected pattern simultaneously starts to play. The tempo indicator flashes on each beat. 4. Press a key pad to select the next pattern to be recorded. * You can also select patterns by rotating the TEMPO/VALUE dial or pressing the numeric keys and [ ]. 5. Repeat Step 4 as needed. 6. Press [STOP/CONT] to stop the recording. Switching Recorded Patterns * To switch the pattern in the first measure, select the substitute pattern before carrying out Step 1. 1. Hold down [REC] and press [START] to start Realtime Recording. The prerecorded pattern starts to play. The tempo indicator flashes on each beat. 2. When you reach the measure before the one you want to substitute, select the next pattern to be recorded. Turn the TEMPO/VALUE dial to select the pattern number. * You can also select the pattern by inputting the pattern number with the numeric keys and pressing [ ]. You cannot select with the key pads when [DPP] is pressed and the DPP function is turned on. 3. When you have finished recording the replacement pattern, press [STOP/CONT] to finish the recording. * If no pattern number is entered as the replacement pattern, then the pattern already recorded is played. Input the Pattern Number Pattern 1 Pattern 2 Pattern 3 Pattern 4 A B A B A A B measure1 2 3 4 5 6 7 Pattern 5 A B Pattern 1 Pattern 2 Pattern 5 Pattern 4 A B A B A B A B measure1 2 3 4 5 6 7 8 You can replace the pattern being recorded by pressing [FILL] during recording. After the fill pattern is played to the end, the recording returns to the basic pattern. * Although the fill pattern is played when [FILL] is pressed at the time of recording, the fill pattern is played at the beginning of the pattern during playback. Chapter 4 Recording and Editing Songs (Song Edit Mode) Starting Realtime Recording Within a Song You can start Realtime Recording from a point other than the beginning of the song. This is convenient when you want to insert patterns in lengthy songs. 1. With the performance s...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - DR-670 (3.22 mb)