Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Some of these may be connect this product to any power supply or adapter other than one described rechargeable. Make sure that the battery being charged is a rechargeable in the manual, on the name plate, or specifically recommended by Yamaha. type and that the charger is intended for the battery being charged. This product should be used only with the components supplied or; a cart, When installing batteries, do not mix batteries with new, or with batteries of a rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please different type. Batteries MUST be installed correctly. Mismatches or incorrect observe all safety markings and instructions that accompany the accessory installation may result in overheating and battery case rupture. product. Warning: SPECIFICATIONS SUBJECT TO CHANGE: Do not attempt to disassemble, or incinerate any battery. Keep all batteries The information contained in this manual is believed to be correct at the time away from children. Dispose of used batteries promptly and as regulated by of printing. However, Yamaha reserves the right to change or modify any of the laws in your area. Note: Check with any retailer of household type batter- the specifications without notice or obligation to update existing units. ies in your area for battery disposal information. This product, either alone or in combination with an amplifier and head-Disposal Notice: phones or speaker/s, may be capable of producing sound levels that could Should this product become damaged beyond repair, or for some reason its cause permanent hearing loss. DO NOT operate for long periods of time at a useful life is considered to be at an end, please observe all local, state, and high volume level or at a level that is uncomfortable. If you experience any federal regulations that relate to the disposal of products that contain lead, hearing loss or ringing in the ears, you should consult an audiologist. batteries, plastics, etc. If your dealer is unable to assist you, please contact IMPORTANT: The louder the sound, the shorter the time period before dam-Yamaha directly. age occurs. NOTICE: NAME PLATE LOCATION: The name plate is located on the bottom of the product.The model number, Service charges incurred due to a lack of knowledge relating to how a funcserial number, power requirements, etc., are located on this plate.You should tion or effect works (when the unit is operating as designed) are not covered record the model number, serial number, and the date of purchase in the by the manufacturer’s warranty, and are therefore the owners responsibility. spaces provided below and retain this manual as a permanent record of your Please study this manual carefully and consult your dealer before requesting purchase. service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmen-Model tally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Serial No. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applica-Purchase Date ble) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. PLEASE KEEP THIS MANUAL 92-BP (bottom) FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! with FCC regulations does not guarantee that interference will not occur in This product, when installed as indicated in the instructions contained in all installations. If this product is found to be the source of interference, this manual, meets FCC requirements. Modifications not expressly which can be determined by turning the unit “OFF” and “ON”, please try to approved by Yamaha may void your authority, granted by the FCC, to use eliminate the problem by using one of the following measures: the product. Relocate either this product or the device that is being affected by the interference. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied Utilize power outlets that are on different branch (circuit breaker or fuse) with this product MUST be used. Follow all installation instructions. Failure circuits or install AC line filter/s. to follow instructions could void your FCC authorization to use this product In the case of radio or TV interference, relocate/reorient the antenna. If the in the USA. antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital If these corrective measures do not produce satisfactory results, please devices. Compliance with these requirements provides a reasonable le...