Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Routing MIDI signals from the computer’s output ports 1 and 2 to MIDI OUT 1(MIDI OUT terminal) on the UW500 Check the check boxes as shown on the right, and click [OK] to enable the setting. NOTE Changing the driver setting (MIDI Patch Screen) Changing the driver setting (MIDI Patch Screen) Changing the connection during recording (MIDI IN ® PC IN) You can change the I/O assignment of the computer’s input port and the UW500’s input port. The left column shows the computer’s input ports (IN 1-2), and the top column shows the UW500’s input ports (1-2). With the default settings, ports with the same number are connected to each other. However, you can change this setting by checking the check boxes. If you check multiple check boxes vertically, a MIDI signal from one input port on the UW500 is distributed to multiple input ports on the computer. If you check multiple check boxes horizontally, MIDI signals from multiple input ports on the UW500 are merged and transmitted to one input port on the computer. NOTE See page 44 for more information on the relationship between the UW500’s I/O ports and the port numbers. Routing MIDI signals from MIDI IN 1 (MIDI IN terminal) and 2 (TO TG terminal) on the UW500 to the computer’s input port 1 Check the check box as shown on the right, and click [OK] to enable the setting. Changing the driver setting (MIDI Patch Screen) Changing the driver setting (MIDI Patch Screen) THRU output of MIDI signals (MIDI IN ® MIDI OUT) You can route MIDI signals received at the input port(s) of the UW500 directly to the output port(s) of the UW500 (this is called THRU output). This routing is useful when you wish to route MIDI signals from a MIDI keyboard directly to a tone generator. The left column shows the UW500’s output ports (1-6), and the top column shows the UW500’s input ports (1-2). To enable this function, check the “Thru ON/OFF” check box in the lower right corner of the screen. If you check multiple check boxes vertically, a MIDI signal from one input port on the UW500 is distributed to multiple output ports on the UW500. If you check multiple check boxes horizontally, MIDI signals from multiple input ports on the UW500 are merged and transmitted to one output port on the UW500. NOTE See page 44 for more information on the relationship between the UW500’s I/O ports and the port numbers. Routing MIDI signals directly from MIDI IN 1(MIDI IN terminal) to MIDI OUT 3(B port of TO TG terminal) First check the “Thru ON/OFF” check box on the lower right corner of the screen. Then check the check box as shown on the right, and click [OK] to enable the setting. Specifications Specifications One stereo- or mono-line recording One stereo-line Playback * Simultaneous recording and playback are possible. 20-bit analog-to-digital conversion 20-bit digital-to-analog conversion Sampling Frequencies: 32 kHz, 44.1 kHz, 48 kHz Standard headphone jack Standard mic/guitar/line in jacks (x2) Digital in jack (for an optical square plug) Digital out jack (for an optical square plug) Line in jacks (RCA pin, L/R) AUX in jacks (RCA pin, L/R) Line out jacks (RCA pin, L/R) MIDI IN terminal (16 ch) MIDI OUT terminal (16 ch) TO TG terminal (MIDI outputs: 80 ch, MIDI inputs: 16 ch) USB terminal DC IN jack Power Supply: Power Adaptor (PA-3B) Dimensions: 200(W) . 158(D) . 47(H) [mm] Weight: 800g Option: 8-pin Peripheral cable for Apple Macintosh Optical digital cable (with square plugs) • Specifications and descriptions in this Owner’s Manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. ¦ The driver cannot be installed. • Is the USB cable connected correctly? > Check the USB cable connection. (page 17) > Disconnect the USB cable, then connect it again. • Is the USB function enabled on your computer? > When you connect the UW500 to the computer for the first time, if the “Add New Hardware Wizard” (page 23) does not appear, the USB function on the computer may be disabled. Perform the following steps. 1. Double-click “System” in the “Control Panel” to open the System window. 2. Click the “Device Manager” tab and make sure that no “!” or “x” marks appear at “Universal serial bus controller” or “USB Root Hub.” If you see the “!” or “x” mark, the USB controller is disabled. For more information, refer to the owner’s manual of your computer. • Is any unknown device registered? > If driver installation fails, the UW500 will be evaluated as an “Unknown device,” and you will not be able to install the driver. Delete the “Unknown device” by following the steps below. 1. Double-click “System” in the “Control Panel” to open the System window. 2. Click the “Device Manager” tab. With the “View devices by type” check box checked, look for “Other devices.” 3. If you find “Other devices,” double-click it to extend...