Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Musikinstrumente - MW10C (286.33 kb)
Musikinstrumente - MW10C (300.07 kb)
Anleitung Zusammenfassung
q w 3 Plug the power adaptor into a standard household power outlet. CAUTION • Be sure to unplug the adaptor from the outlet when not using the mixer, or when there are lightning storms in the area. •To avoid generating unwanted noise, make sure there is 50 cm or more between the power adaptor and the mixer. Turning the Power On/OFF Press the mixer’s power switch to the ON position. When you are ready to turn the power off, press the power switch to the STANDBY position. CAUTION NOTE Note that trace current continues to flow while the switch is in the STANDBY position. If you do not plan to use the mixer again for a long while, please be sure to unplug the adaptor from the wall outlet. To prevent loud pops and noises, turn on the power to your sound gear starting with the sources (instruments, CD players, etc.) and ending with the power amplifier or powered speakers. Example : Instruments, microphones, and CD players first, then the mixer, and finally the power amplifier or powered speakers. When turning off the power to the system, reverse the order described above. 6 MW8CX/MW10C Owner’s Manual Mixer Basics MW8CX/MW10C Owner’s Manual 7 Quick Guide This quick setup and operation guide covers everything from installing the Cubase AI software to using Cubase AI for recording and mixdown. While going through this section you might find it useful to also refer to the “Front and Rear Panels” section on page Mixer Basics MW8CX/MW10C Owner’s Manual 7 Quick Guide This quick setup and operation guide covers everything from installing the Cubase AI software to using Cubase AI for recording and mixdown. While going through this section you might find it useful to also refer to the “Front and Rear Panels” section on page , as well as the pdf manual supplied with the Cubase AI software. You are only permitted to use this software pursuant to the terms and conditions of the “Steinberg Soft- ware End User License Agreement (EULA)” shown during the installation. 1 Start the computer and log on to the Administrator account. 2 Insert the included DVD-ROM into the computer’s DVD-ROM drive. 3 Follow the on-screen instructions to install the Cubase AI software. • In order to have continuous use of Cubase AI, including support and other benefits, you will need to register the software and activate your software license by starting it while the computer is connected to the Internet. Click the “Register Now” button shown when the software is started, then fill in all required fields for registration. If you do not register the product, you will be unable to use the application after a limited period of time expires. •To install on Mac computers double-click the “Cubase AI*.mpkg” icon or the “Cubase AI* Start Center” icon. “*” indicates where the version number appears in the actual icon name. • Visit the web address below for the latest information on: <1 Turn the power to the MW mixer and all gear that is to be connected to the MW mixer off/standby (except the computer), and set the LEVEL controls and STEREO Master control to their minimum settings. 2 Connect the MW mixer to your computer using the supplied USB cable. When connecting or disconnecting the USB cable be sure to turn the 2TR IN/USB control all the way down. Disconnect the USB cable when using the MW mixer without the computer. Step 1 Installing Cubase AI Important! NOTE Step 2 Connecting to the MW mixer LEVEL controls STEREO Master control USB Connection Precautions Be sure to observe the following points when connecting to the computer’s USB interface. Failure to observe these rules can result in computer freezes/ hang-ups and possibly data loss or corruption. If the MW mixer or computer does hang up, turn the power to both devices off and then on again, and restart the computer. • Be sure to wake the computer from sleep/sus- pended/standby mode before making a con- nection to the computer’s USB connector. • Connect the MW mixer to the computer before turning the MW mixer power on. •Always quit all applications running on the computer before turning the MW mixer’s power on or off, or connecting or disconnect- ing the USB cable. •Wait at least 6 seconds between turning the MW mixer on or off, and between connecting or disconnecting the USB cable. CAUTION CAUTION NOTE Quick Guide MW8CX/MW10C Owner’s Manual Mixer Basics 8 3 Connecting Microphones and/or Instruments. For details on making connections refer to the “Setup” section on page 15 and the “Front & Rear Panels” section on page 16. To prevent loud pops and noises, turn on the power to your sound gear starting with the sources (instruments, CD players, etc.) and ending with the power amplifier or powered speakers. Example : Instruments, microphones, and CD players first, then the mixer, and finally the power amplifier or powered speakers. Observe the following precautions when turning on phantom power. • Make sure that the PHANTOM switch is off when phantom power is not needed. • When ...
Dieses Handbuch ist für folgende Modelle:Musikinstrumente - MW8CX (1.61 mb)