Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Musikinstrumente - MOTIF-RACK XS (3.95 mb)
Musikinstrumente - MOTIF-RACK XS (271.65 kb)
Anleitung Zusammenfassung
• Before turning on the power to the instrument, connect the computer to the USB TO HOST connector. • Execute the following before turning the power to the instrument on/off or plugging/unplugging the USB cable to/from the USB TO HOST connector. -Quit any open applications. -Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard or playing back a song.) • While a USB device is connected to the instrument, you should wait for six seconds or more between these operations: (1) when turning the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable. MOTIF-RACK XS Editor MOTIF-RACK XS Editor is a convenient tool which lets you edit and save the various parameters of your MOTIFRACK XS tone generator. These include Voice and Mixing parameters (edited in the Voice or Multi mode of the MOTIF-RACK XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand graphical interface, you can edit various parameters of the MOTIF-RACK XS right from your computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to the MOTIF-RACK XS instrument. You can use the MOTIF-RACK XS Editor as a plug-in for the software listed below. • Studio Manager •DAW application software compatible with Studio Connections Installing the Software The actual installation steps and the use of the software itself differs depending on the operating system that you are using. Please refer to the appropriate installation instructions. 1 Verify that your system meets the operating requirements of each software program. .......................page 4 2 Install the appropriate driver to your computer. .................................................................................................page 5 3 Install the Studio Manager and the MOTIF-RACK XS Editor........................................................................page 6 4 Start up the Studio Manager, then start up the MOTIF-RACK XS Editor. ................................................page 8 For subsequent operations, refer to the PDF manual accessed from the [HELP] menu in the respective software program. MOTIF-RACK XS Editor Installation Guide Minimum System Requirements The system requirements below may differ slightly depending on the particular operating system. Windows OS Windows Vista/Windows XP Home Edition/XP Professional Computer Intel Pentium 1.4 GHz or higher Available Memory 512 MB or more Hard Disk 200 MB or more Display 1024 x 768, high color (16 bit) or higher Other USB-MIDI Driver (for Windows Vista) version 3.0.2 or later USB-MIDI Driver (for Windows XP/2000) version 2.2.0 or later Studio Manager version 2.1.7 or later Cubase SX 3.1, Cubase 4 or Cubase AI 4 Macintosh OS Mac OS X 10.4 or later Computer Power PC G4 1GHz or higher CPU / Intel CPU Available Memory 512 MB or more Hard Disk 200 MB or more Display 1024 x 768, high color (16 bit) or higher Other USB-MIDI Driver (for Mac OS X) version 1.1.0 or later Studio Manager version 2.2.0 or later Cubase 4 or Cubase AI 4 n The Minimum System Requirements described above are applied to the MOTIF-RACK XS Editor version 1.1.0. Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version information of each program and its system requirements at the following website The system requirements may differ slightly depending on the particular computer. When using the MOTIF-RACK XS Editor as a plug-in within a DAW program, refer to the minimum requirements for the DAW software you are using as well as the minimum requirements for the MOTIF-RACK XS Editor given above. MOTIF-RACK XS Editor Installation Guide Software Installation To use the MOTIF-RACK XS Editor, you’ll need to install the following software programs. Follow the appropriate instructions below corresponding to the software you’re using. • USB-MIDI driver or AI Driver • Studio Manager •MOTIF-RACK XS Editor USB-MIDI Driver or AI Driver Installation To operate your Yamaha hardware from your computer via a USB cable or an IEEE1394 cable, you’ll need to install the USB-MIDI driver software or the AI Driver software. The USB-MIDI driver is necessary when using a USB connection to transfer MIDI data back and forth between your computer’s DAW software and the MOTIF-RACK XS. The AI Driver is necessary when using an IEEE1394 connection to transfer Audio/MIDI data back and forth between your computer’s DAW software and the MOTIF-RACK XS with optional mLAN16E2 installed. DAW USB cable Driver Computer IEEE1394 cable MOTIF-RACK XS Make sure to check the following website for installation and up-to-date news on the USB-MIDI driver. Make sure to ch...